How to disable sleep mode on Huawei and Honor: step-by-step setup

What is sleep mode

This is an option on Android smartphones and tablets that controls display activity. If you don't use it for a set period of time, the screen first dims and then automatically locks. In the settings, you can select one of the available time intervals after which the display will turn off.

You can activate the function as follows:

Open the system application “Settings”.
Go to the “Screen” item.
In the new window, select the “Sleep mode” section.
We change the time to turn on the mode in the range from 15 seconds to 10 minutes.

It is also possible to select the “Never” option. This way you will completely remove sleep mode on Honor - and the screen will remain active until you block it yourself.

Please note that you can change - increase or decrease - the time interval for launching at any time.

Android Power Saving Modes

In Android 4.4–5.1 (we will not consider the versions below - they are rapidly becoming outdated), the service will work and instantly respond to server requests, but only as long as the screen is on. A few seconds after the screen turns off, the smartphone will go into sleep mode (suspend), and the gap between sending the request and the response from our application will be about a minute. This is the period between maintenance wake-ups of the device, and we cannot influence it.

In Android 6.0–7.1 the situation will be approximately the same, but after about an hour the smartphone will go into the so-called. After this, you may either not receive a response from the application at all, or receive it after an hour or two. And all because in Doze mode, the smartphone actually prevents third-party applications and their services from working and completely cuts off their access to the Network. They can only gain control for a short period of time, an hour after switching to Doze mode, then two hours, four hours, with increasingly increasing intervals between awakenings.

The good news is that Doze works system-wide and turns on an hour after the screen turns off and only if you do not touch the smartphone (in 7.0–7.1 you can touch it), and turns off immediately after unlocking the smartphone, connecting to the charger or moving the smartphone (again, not in 7.0–7.1). That is, we can hope that at least during the day our service will work normally.

The bad news is that, in addition to Doze, Android 6.0–7.1 has another power saving mechanism called App Standby. It works something like this: the system monitors which applications the user uses and applies the same restrictions to rarely used applications as in the case of the Doze mode. When connected to the charger, all applications switched to Standby mode receive an amnesty. Standby mode does not apply to applications that have notification or administrator rights (not root).

In total, Android has three mechanisms that you have to deal with:

Suspend is a normal power saving mode that can slow down the response from the device by about one minute;
App Standby - an aggressive power saving mode that can slow down the response for a day;
Doze is an aggressive system-wide power saving mode that applies to all applications.

All these energy-saving modes can be bypassed, but the further into the forest, the more crutches and inconveniences the user will experience, so we will consider several options for bypassing energy-saving mechanisms, from the most light to the hardcore.

What to do if the option is not available

Often users complain that they cannot launch the option. The function itself in the settings menu is available, but not active: you cannot change the screen parameters, the time interval cannot be adjusted, etc. This happens if you have energy saving enabled. This is a special mode in which the screen locks automatically after 30 seconds of inactivity.

You can make sleep mode active again by disabling power-saving mode. You can find its parameters in the “Battery” section in the settings application.

Another problem that users face is that WhatsApp notifications do not arrive in sleep mode. The solution is this: in the messenger settings you need to allow notifications to be displayed on the locked screen.

Change screen resolution on Honor 9 Lite

A Full HD screen has more power requirements than HD screens. Thus, phones with Full HD screens drain battery faster than phones with HD displays. But in Honor 9 Lite, you can change the screen resolution from Full HD to HD. To change your screen resolution, go to Settings > Display > Screen Resolution. Under CUSTOM, select HD 1440 x 720 to reduce the screen resolution. Select FHD+ 2160 x 1080 if you want to set the resolution to Full HD. Turn on Smart Resolution if you want your phone to automatically select the best resolution to save your battery. When the battery runs out, the resolution will automatically be set to HD if Smart Resolution is enabled.

Setting up sleep mode on Huawei and Honor

On Huawei and Honor phones, you can not only select the period of time after which the device will go into sleep mode, but also completely disable screen timeout. To do this, go to the settings, go to the “Display” section, open the “Sleep mode” item and select the appropriate option. If you want to disable the display going to sleep, o.

We recommend not turning off auto-lock completely (so that the smartphone does not continue to work for hours if you accidentally forget to press the power button) and setting the display timeout to within two minutes (to reduce battery consumption).

How to prevent screen lock while charging

Also in EMUI, as on stock Android, you can prevent the device from going into sleep mode when it is being recharged. To do this, enable developer mode, go to the “System” section and open the “For Developers” section. Activate the “Keep enabled” option. Now the screen will remain active while charging, even if the sleep mode settings are set to a period of time rather than “Never” being selected.

If you want to disable the display from fading while certain applications are running, you will need a special program called Stay Alive! After installing the program, give it access to usage statistics. Then launch Stay Alive! and activate the “Enable selected apps” option. Once you've completed these steps, open the "Select apps that will Stay Alive!" and select the applications for which you want to disable screen sleep.

Stay Alive! Keep screen awake Developer: SyNetDev Price: Free

Typically, Huawei and Honor smartphones go into sleep mode after 30 seconds of no contact with the screen. An exception may be running applications or videos. Sometimes users complain about such a short interval and are interested in how to increase the time during which the display does not go dark, or how to disable sleep mode on Huawei and Honor phones.

How to remove sleep mode on Honor and Huawei

You need to turn off sleep mode on Huawei and Honor phones when the function interferes with slow reading of books, recording a lecture, or viewing a map.

To deactivate, you need to follow a simple algorithm.

Open Settings.
Go to Screen/Sleep/Never.

But Honor developers do not recommend completely disabling the function, since the smartphone will work for hours if you do not press the power button. You can set the display timeout to two minutes in the settings. This will reduce energy consumption by half and will not irritate you when leisurely using smartphone functions.

Why does the fingerprint not work on Huawei and Honor: reasons and what to do?

To set a specific time, click on the “Screen” section.
Select Sleep Mode.

If it is not active, then this is most likely due to energy saving. Return to the main settings menu, click on the “Battery” line.

Turn on energy saving.

Then return to the “Screen” section and check availability.

How to Connect and Set Up the Huawei Honor Band 5 Fitness Bracelet Through the Phone Application

Click “Sleep mode”, set the time after which it will become active. Perhaps a sufficient solution to the problem would be to increase the frequency of enabling the option.

Some models have a "Never" button to turn off without adjusting the time.

If you have any questions or complaints, please let us know

What is hibernation mode?

Sleep mode is a special feature built into all smartphones or tablets. The purpose of this option is to save energy. If, after a certain time set in the settings (default - 30 seconds), the device is not used, then it will go into sleep mode, the display will go dark, and the smartphone will automatically turn on the lock.

The presented function is quite useful. After all, if the user forgets to lock the phone, the system will do this on its own, and thereby save the charge. But, in some situations, this can interfere, which is why many people have a question - how to change the interval or completely turn off the transition to sleep mode.

How to access

It is logical that such access cannot be obtained through the standard phone menu. Then how to log in? Special commands are used for this purpose

It is important to note that the manufacturer of a particular brand of mobile equipment can independently change the password:

First of all, you should try the universal option: *#*#3646633#*#*;
If there is no result, then you should enter one of the codes that is usually used by Huawei, which also produces Honor smartphones: *#*#2846579#*#* or *#*#2846579159#*#*.

There are several important nuances that you should also be aware of:

You shouldn’t even try to copy the password or use it by writing it in the phone book. It won't work! Manual input only. The developers specifically did this so that the user is fully aware of his actions. For example, this is a guarantee that the child will not accidentally go into the engineering menu and change the settings;
Almost always, after entering all the necessary characters, an automatic transition occurs. But some manufacturers have made the command work only after additional use of the call button.

Setting up sleep mode on Huawei and Honor

It is possible to configure not only the time after which the screen goes dark and the device is locked, but also to remove this time altogether:

Go to settings.
Find the "Display" tab.
Next is “Sleep mode”.
Set the desired time.

Please note that the longer the interval you select, the faster the battery will discharge, because prolonged operation of the display actively drains the device’s charge. For this reason, it is recommended to turn on sleep mode.

Disabling by third party services

How to disable sleep mode on Huawei and Honor phones? Use special applications. You can set the inactivity time after which the display shuts down using third-party services designed to manage sleep mode on Android.

There are quite a lot of such applications in the Google play service. Let's look at the most popular programs:

"Never-fading screen." A simple application that controls the sleep function. Launch the utility on your phone and select applications in which the display will not turn off.
Hold Screen On Demo. The presented program requires access to the front camera. Its job is to track your gaze, which is why the front camera is activated. The utility independently detects when the user is not looking at the display and turns it off. There is also a more precise setting that allows you to select specific applications in which the screen will not be blocked.

The official market offers a wide list of similar programs; we have reviewed the most popular ones. You can also choose other software, the main thing is to install it from GooglePlay and not from third-party resources.

How to turn sleep mode back on

You can turn the mode back on like this:

Let's go to settings.
Select the “Screen” item.
Next is “Sleep mode”.
Drag the slider to “On.” and set the desired time.

All smartphones and tablets running Android have a set time after which the device goes into sleep mode. Most devices go to sleep after 30 seconds of user inactivity. This time is set by default, but not everyone has enough time to read and view content. You can increase it in the settings, and to completely disable the screen timeout, you will have to activate the option in the “For Developers” section or use a special application.

Such a short time before the screen fades out is set for two reasons. Firstly, for security reasons - so that no one can use the device without the owner’s knowledge if he has not blocked it. And the second reason lies in saving battery power.

The fact is that the display backlight drains the smartphone’s battery, so a significant increase in the time after which the screen goes out will reduce the operating time of the device on a single charge. Here it’s worth finding the “golden mean” - setting the timeout so that you feel comfortable using the phone, but at the same time, so that the device does not work for nothing for half an hour if you forget to press the lock button.

Therefore, it is best to disable “falling asleep” of the display only in the necessary programs, and for the entire system set the timeout value within one to two minutes. How to do this is described later in the article.

In what cases is it undesirable to turn off the screen automatically?

However, a situation often arises when this option becomes annoying. For example, when leisurely reading from the screen, without scrolling, it may go out after half a minute and you have to press the power button, unlock the device and look for the necessary fragment to continue. Also, a timeout can interfere in the following cases:

viewing photos and videos;
games in which a break in the user's actions can take a lot of time (for example, chess);
working with navigation maps when GPS positioning is turned on.

In some programs, developers provide a system timeout blocking function (video players, games), but not in all of them. Let's figure out how to prevent the Android screen from turning off and the device not going into sleep mode.

What is sleep mode

Sleep mode is a feature that dims and then locks your phone's screen when you don't use it for a while. Manufacturers added this mode not only for convenience, but also to save battery and longer operating time on a single charge.

To disable or enable an option, we:

Open the settings, section “Screen”;
Here we scroll to the “Sleep mode” item;
From the available time intervals, select the most suitable one.

What time should you choose? It all depends on your needs. If you want to avoid charging your gadget for as long as possible, select 15 seconds. If you want to use your phone without touching the display for as long as possible, select a ten-minute interval. It's a matter of comfort.

One of the conveniences of the Honor software shell is that without Root rights you can configure a lot. This includes the operation of various options when the screen is off. For example, you can configure Wi-Fi to save even more battery power. For this we:

Open the available Wi-Fi networks and click on “Configure”;

2. In the “Wi-Fi in sleep mode” item, select “Only when powered from the network” or “Never”.

You can also configure the screen to auto-lock after turning on hibernation. To increase operating time, you should choose the lowest indicator. For this:

Open the settings, find the “Screen lock settings” section;
In the “Auto-lock” item we set it to 5 seconds.

Problems with sleep mode in Honor 6a

It happens that Honor 6a owners decide to change the screen timeout, but they find that the item is inactive and cannot be changed. This happens if energy saving is turned on. This feature allows the phone to automatically go into hibernation after 30 seconds of inactivity. Disable power saving and you can easily configure the option.

Thus, enabling and configuring sleep mode on the Honor 6a smartphone can greatly increase battery life. The fewer programs running in the background, the slower your battery drain will be. Share link:

Sources used:

https://www.orgtech.info/spjaschiy-rezhim-honor/
https://puregoogle.ru/2019/05/sleep-mode-huawei-honor/
https://huawei-wiki.com/kak-otklyuchit-spyashchiy-rezhim-na-telefonah-honor-i-huawei.html
https://4idroid.com/kak-nastroit-ili-otklyuchit-spyashhij-rezhim-v-android/
https://infohuawei.com/razbor-voprosov/android/spjashij-rezhim-honor-6a/

SHARE Facebook

Previous articleRebooting any Samsung smartphone - detailed instructions

Next articleIs it possible to block a hidden number on Android and iPhone and how to do it.