Why doesn't the iPhone screen lock during calls and what should I do?

The screen does not lock during a conversation - such a nuisance can make the conversation extremely inconvenient, since a person has to think about not touching the smartphone with his ear or cheek. Any touch in this situation can make a second call, send a message, or launch an application. And a simple set of numbers also causes negative feelings. At the same time, Android phone manufacturers have taken care of a special function that locks the screen when brought to the face during a call. If the display does not go off, users should look for the problem and check the current phone settings in order to restore the operation of such an important and useful mobile service.

Solving the problem yourself

Some Apple users are in no hurry to resort to the help of a repairman, but try to restore the phone on their own to save money.
Most people try to replace components or batteries without having sufficient knowledge. This decision may lead to the purchase of a new device. Thinking about why “Power” stopped responding and how it can be fixed, several options come to mind, where you can choose from the whole variety:

• replace the cable if you have already worked with similar devices;
• update the firmware that affects the operation of the gadget;
• Check the system connector several times.

Only an experienced technician can safely replace the cable and install a new part. Our specialists will tell you what to do in this situation and help you restore the treasured button in a short time.

Practical use of Assistive Touch

Thanks to this technology, you can search and make settings for certain elements of the gadget. For example, adjust the sound volume, rotate or lock the display, and much more. But to get started, you need to open the menu and select the element that needs to be changed.

Upon completion of work, to disable the technology, take the following steps:

• Launch the menu and click on the icon that says “Device”.
• Touch and hold the lock screen until the power off slider appears.

The technology in question can also be used to navigate to the main screen. And this is done very simply - by opening the AssistiveTouch menu and clicking on the home icon. To launch Siri, you need to open the menu again and click on the assistant icon. But we note that Siri is only available on gadgets with operating systems version 5 and older.

To go to notifications, as always, first open the menu. Next, click on the notification center shortcut. After that, click on the control point. A screen will appear where you can activate or disable Bluetooth, use the AirPlay and AirDrop functions, take pictures and much more. Then the photos can be transferred to a computer.

Third Party Applications

If you are not satisfied with the system security settings, you can use third-party applications. There are many different utilities in the Play Market that help you set up protected access to your device as you wish. An example of the capabilities of such applications will be given in the OS9 Lock Screen program.

After installation, the program must be given all the permissions it requests: access to contacts, photos, etc. Then you can start working with the application. First you will need to set a password. To do this, click on the “Lock Screen” button. Without the entered password, all other panels will be inactive. The code must be repeated twice. After this, the color of the main panel will change and all functions of the program will become active. The application sets its own interface for the display: changes the wallpaper, displays notifications, date and time. To unlock the Android screen, you will need to enter the password specified in the utility.

We recommend: How to remove a map from Google Play

Features OS9 Lock Screen

The application allows you to:

• Change password;
• Set wallpapers and photos from the gallery to a locked display;
• Enter the text that will be displayed on the screen;
• Set text color.

The program has a simple and intuitive interface, which allows you to quickly understand its work.

By setting up limited access to your phone in the form of a password, PIN code or pattern, you don’t have to worry about the data on your phone and hide personal information from prying eyes.

Programs and applications

Unfortunately, it is not possible to solve the problem of a non-working power button using a program at the time of a breakdown. However, there are several applications that can be installed in advance, for example, at the first sign that the button is acting up. The following applications and programs are currently available to users:

1. Power button to Volume button. Already from the name it is clear that the main task of the program is to transfer the power function from the start button to the volume control.
2. Gravity Screen – on/off. The application increases sensitivity to device movement. If the phone is left on a horizontal surface for a long time, the screen will automatically lock. However, as soon as you lift or move the device, it turns on.
3. Shake Screen on/off. A simple and easy-to-use application that can turn on the phone even without touching the screen. Just shake the device lightly to activate the display.
4. Proximity Actions. A program that allows you to control your smartphone using special motion sensors.

USB Debugging Mode

If your phone was in USB debugging mode before disconnecting, then after connecting to a desktop computer or laptop, you can try to start the download using the computer's command line.

After this, taking advantage of this fortunate opportunity, you need to immediately install the ADB utility on your computer, i.e. Android Debug Bridge, with which you can control your phone via a computer and enter “adb reboot” . The phone screen will be unlocked, and you can change the settings, adapting the device to work without a power button.

The phone was turned off

The design of the cases of some devices can lead to shutdown during a fall - the battery simply falls out, knocking out the cover. But the need to turn on the phone will not go away. How can I do this if the button is not working? If you are going to turn on the device without using it, then you should resort to one of the methods that will be described below.

Using the charger

Most device models are equipped with a function that automatically turns on when the charger is connected, and if your smartphone cannot be considered one of these models, then it is still worth installing a charger cable. All that remains is to hold down the volume control button, which is usually located on the side panel of the device. Such measures very often help to bring the device “to life.”

Using a computer

This method is relevant only in cases where the battery charge is at least five percent:

1. We take the USB cable in our hands and connect it to the phone.
2. We connect the second end of the wire to the computer and wait for the operating system to load on the mobile device.

USB Debugging

If the USB debugging function was enabled on your phone before disconnecting, then you need to establish a connection with a personal computer or laptop and try to activate the phone using the computer’s command line.

To do this you need to do the following:

1. Open this software.
2. We launch the command line in it and write “adb reboot”.
3. The phone screen should be unlocked, which gives access to the functions of changing the method of unlocking the smartphone without using the power button.

Still don't know how to fix the power button on your phone? You may need information about other inclusion methods, which we will look at next.

The power button on the phone does not work: how to turn on a switched off phone?

If your device turns off completely (for example, the battery is dead) and the power button is out of order, you can start the device in several ways:

Recovery Mode

Step 1.

• Connect the charger to your gadget and let it charge for 10-20 . Next, try holding down the volume up and down buttons at the same time and keep them pressed until the Recovery .
• On some models, for example from the manufacturer Samsung Home buttons is used to enter this menu .
• If your device requires a power button to enter the Recovery , then immediately proceed to the next section of the article.

Image 8. One example of logging into Recovery mode.

Step 2.

• As soon as you get to the Recovery , using the volume down and up buttons you need to go to the line “ Reboot System Now ”. However, if your power button is faulty, then you will not be able to activate this line.
• Recovery on your smartphone , as in the image below, then just go to the above line and wait a few minutes. The smartphone will reboot on its own after some time.

Image 9. Reboot the device through the Recovery menu.

• If your device has a Recovery type TWRP , then it supports touch control and there will be no problems with rebooting the device.

ADB program

As you can guess from the name, the Android Debug Brige is intended exclusively for devices based on the Android operating system and is capable of turning on a smartphone with a faulty power button. The only condition for its use is that the USB debugging function is activated on the device.

If debugging is inactive, try starting the device through the Recovery and activating this function. After that, turn off the device and follow these steps:

Step 1.

• and install the ADB on your computer. It is advisable to unzip the downloaded archive to the system drive.

Image 10. Installing and unpacking the ADB program.

Step 2.

• Connect your smartphone to your computer using a USB cable and wait for the drivers to install automatically. If the drivers were not detected automatically, you can find them on the Internet and install them manually.
• In the “ Start ” menu, open “ All Programs ”, find the “ Accessories ” folder, and in it the line “ Command Prompt ”.

Image 11. Finding the command line.

Step 3.

• Right-click on the application name and select “ Run as administrator ” from the list that appears.

Image 12. Running the command line as administrator.

Step 4.

• In the window that opens, enter the command “ cd c:\adb ” in order to check whether your smartphone is detected in the ADB .

Image 13. Entering a command to check the connected device.

Step 5.

• Once you are sure that the smartphone has been recognized by the program, enter the command “ adb reboot ” in the command line and press “ Enter ”. The gadget should reboot. At this point it should be disconnected from the computer.

Duplicating the Home button at the software level

If the above methods do not help, the breakdown can only be fixed at a service center; only replacing the entire module will help. Until this point, duplicating the key at the software level will help make the user’s life much easier.

To do this, go to “Settings”, select the “General” menu and then “Universal Access”. After this, the Assistive Touch function is needed. A small menu will then appear on the touch screen, which will temporarily replace the “Home” function and more.

Old versions of iOS may experience errors after repair. Users all over the world were faced with a situation where, after replacing the Home key tied to Touch ID, the phone locked. This error has been fixed in the new version of the OS. Accordingly, a simple firmware update will help in this case.

Disable screen lock in standard Android interface

First, we will show how the screen lock is disabled on Android devices with a standard interface. To do this, you need to go to the Android settings and open the “Security” section there (the “Personal Data” settings block).

Next, you need to go to the “Screen Lock” section, it should be at the very top of the screen. It should be noted that if your device is configured to unlock using a password, PIN code or pattern, then when you enter the “Screen Lock” section you will be asked to unlock the device again. Without this, you won’t be able to go to the “Screen Lock” section and disable the lock.

As a result, you will see a list of all possible ways to lock the screen on your Android device. If you want to completely disable the screen lock, then you need to select the “No” option here.

That's all, you have disabled the screen lock. Now the device will turn on immediately after pressing the Power button and will not distract you with the need to perform additional actions.

How to use your phone without the power button

Depending on the state of the smartphone, you can use various methods.

The simplest option is a locked phone with a charged battery:

• Connect the device to the power cord. While charging, the screen is activated and allows you to work with the device.
• Download a special application. The store offers a lot of program options that allow you to expand the functionality of the screen.

Always On Amoled. The application allows you to keep your smartphone screen active even after it is locked. Just tap the screen a couple of times and it will unlock. The program is designed for devices with Amoled screens, but also works on most regular devices.

Price: Free

AC Display. The program not only displays notifications on the screen, but also allows you to set the option to activate when removed from your pocket or bag. Activate the ability of the phone to turn on the screen when changing its position in space.

Enabling is done from the settings menu in the “gestures” item. When activated, the screen will light up every time the device is picked up from a horizontal surface, such as a table.

Price: Free

You can install an application that activates the screen when you move or by shaking your smartphone.

Gravity Screen - On/Off. The program performs the same function as activating gestures and is intended for devices equipped with an accelerometer.

Price: Free

Or you can install a program that allows you to activate the screen by double tapping – Double Tap Screen On and Off. The program allows you to activate or lock your smartphone screen with a double tap.

Price: Free

What to do if the pattern key or password is forgotten?

Everything is much more complicated if you have forgotten your password, PIN code or pattern. In this case, you won’t even get to the settings section. Fortunately, the problem can be resolved on some devices. A graphical screen lock, after several unsuccessful attempts to enter the key, may offer to get to the desktop in a different way - by entering data from your own.

If Internet access is disabled on your smartphone, then you will have to use Recovery mode. User files from the phone will be deleted, as will all settings. At the same time, the screen lock will be eliminated - it will return to its previous appearance when you need to swipe your finger across the display.

Locking the screen of your phone is an important security feature that helps protect your smartphone not only from accidental taps on the screen, but also from third-party users. Tell your password only to close people whom you completely trust. Phones based on the Android operating system have a high degree of security - if you forget your password to unlock the screen or a special pattern, you can lose all the data on your device. Write down your passwords in a safe place, such as a notepad, that only you can access, so you don't forget this important information. If you want to remove screen protection or have forgotten your password, read this article and take its basic instructions into account.

Taking a screenshot

A shortcut with the corresponding function displayed on the display allows you to take another feature - a screenshot. And many users know about this and actively use it. This is also a convenient way to take a screenshot of the screen. So the lock button is not the only advantage of Assistive Touch technology.

If you have both buttons saved on your device, you don’t need to reach 2 elements with your fingers to press them. And, I must admit, it is very convenient.

Is this function convenient to use? The answer is obvious - absolutely yes. Moreover, the shortcut can be moved anywhere on the screen. At the same time, the button is always at hand and does not interfere with the user. For all these reasons, many users today can no longer imagine working on an iOS gadget without this technology.

It allows you to fully control the device and perform actions such as swiping or pinch with several fingers. Thanks to it you can also use Siri and 3D Touch.

Other non-standard ways to restart iPhone

If you want to quickly restart your iPhone, we recommend using the following methods:

Bold font

1. In order to turn off the device, you need to go to “Settings” → “General” → “Universal Access”.
2. Next, turn on the Bold feature by swiping the slider to the right.
3. The device will prompt you to reboot.

The advantage of this method is its speed. The only change that will occur as a result of activating this function is a change in the font thickness. But if you need to restart your smartphone by doing a minimum of actions, this method is for you.

Reset network settings

1. To quickly turn off your phone, go to Settings, then the General tab.
2. Scroll to the very bottom of the list. Click on the "Reset" item.
3. In the window that opens, select “Reset network settings.”
4. At the next stage, the iPhone will prompt you to enter a password (if your device is protected) and will reboot.

Launch without the Power button

First, let's look at whether it is possible to start the gadget without using the power key. If the power button is faulty, but the Android device is turned on, try connecting it to the power cord and pressing the volume control key. Maybe it will be re-launched even then.

Turn on Android if the phone is in sleep mode

In the case when the smartphone is working, but is in sleep or standby mode, you can enter the context menu even with a broken start button quite simply. In this case, the main thing is to prevent the battery from being completely discharged:

• It’s trivial to put your mobile phone on charge.
• Double-click on the screen; however, this operation is not supported by all devices.
• Hold down the Home button for a few seconds, if it exists on your device.
• Dial your number from any other smartphone.

If the desired effect is not obtained, you can try holding down both the volume up and down keys, which will help launch the gadget reboot menu.

Switching on via PC

The following method will tell you how to start your phone without the power key. To do this, you need to connect your Android to your computer, install on your computer the program for flashing touchscreen smartphones Android Debug Bridge, or ADV for short, and through it, by entering “adb reboot” in the command line, check the reaction of the mobile phone to charging via the connected USB cable.

Perhaps this will unlock the gadget without using Power. The only condition is that the “debugging via usb” function must be enabled on the device in the settings. In addition to rebooting, this utility opens root rights and allows you to reflash the phone as a whole.

A simpler version is the ADB Run program. It will also help you restart the gadget. To configure Android through this utility, you need to follow these steps:

1. Connect a computer with a faulty smartphone.
2. Download and open the ADB Run window.
3. In the window that opens, put the Reboot Device command. To do this, enter the number “4” in the appropriate field.
4. Start a restart by selecting the Reboot function.

Special utilities

To configure your smartphone to work even with a broken power key, you can install one of the useful applications. In this article we will present the most common programs and their methods for restoring a faulty phone.

Gravity Screen - On/Off

This program will lock the device when it is left unattended on any flat surface for a long time, and will turn on the device as soon as you move or lift it.

Power button to Volume Button

A wonderful program that, if a breakdown occurs, simply transfers the on/off function to the volume control key.

Application to lock the screen during a call

There are many apps that enable screen locking during a call, such as Smart Screen On or Proximity Sensor. To use them to calibrate the sensor, you will need:

1. download the program and run it;
2. enter the Calibrate Sensor section;
3. close the sensor with your finger, following the prompts on the screen;
4. click next;
5. remove your hand from the sensor and press “next” again;
6. start the sensor setup process and save the result.

It is important to emphasize that the actual calibration process may differ from that described, since different applications have their own characteristics and distinctive features. In addition, some services require root rights to make changes to the phone.

Temporary solution to the problem of a broken iPhone button

There are many instructions on websites on the Internet that supposedly help you fix the iPhone power button. However, almost all of them are lies, since they talk about temporary replacement of the button thanks to a system program. Apple engineers apparently assumed in advance that users might have such a need. To do this, go to “Settings”, then “General”, then “Universal Access”, then AssistiveTouch. After selecting this item, a square button with many functions will appear on the smartphone screen.

The proposed menu has a locking function (category “Device”). Essentially, it functions as the iPhone's screen lock button.

This is the essence of the temporary button replacement, which many users successfully use. Of course, the button remains physically broken. To fix this, read on.

Repairing the iPhone lock screen button

As you remember, the reason for the button failure is a crumbled tubercle. There are 2 ways to fix the problem:

• — Change the cable completely
• — Repair the old cable

You can completely change the screen power button cable at a service center or yourself at home. If your hands are strong enough, and you have the necessary set of tools, then you can easily repair the button yourself and save money. The main thing is to buy a new cable. By the way, this can be done directly on the Chinese website AliExpress.com.

Repairing the cable (and more specifically the spring contact of the button) consists of restoring the integrity of the small tubercle. You can use a blade to remove the bump from the Chinese train and then glue it back into place in the original train. All work must be carried out very carefully and carefully so as not to damage tiny parts.

In this simple way you can repair the volume or power buttons on your iPhone screen. However, if you have never repaired anything in your life, it is better not to try, but to entrust the work to professionals.

Usually the lock button becomes unusable on iPhone 5, iPhone 4, iPhone 5s, iPhone 6, iPhone 4s.

It’s also: “power” button, “power”, “sleep/wake”, “turn on”, “power”…. If it doesn't work, you won't be able to turn off or take a screenshot of your iPhone 5, iPhone 7, iPhone 5s, iPhone 6, iPhone 4 or iPhone 4s.

Apple was even taken to court over this issue. Two owners in the United States are suing Apple over the issue, which they say is caused by poor workmanship.

If you're using a Model 5, Apple offers a free lock screen button replacement.

On April 25, 2014, the company confirmed that some smartphones have low-quality buttons and offered a free exchange.

It's good to hear that Apple is addressing the issue, but you'll be disappointed that the trade-in is only available to iPhone 5 owners and you have an iPhone 4 and iPhone 4s.

If the power button has stopped working or is not working well (judging by the number of people reading this article, this happens every day - this was added after this entry was written) and the warranty has expired, then there are two solutions for you: software and hardware repair (guide below) .

What to do if the PowerLock button on your iPhone doesn't work

A broken key will make it difficult, but will not prevent you from using your smartphone, since Apple has provided for such a case. In addition, if you hope that the failure is software, try simply turning off and then turning on the phone. Let's look at the available methods on how to turn on an iPhone without a lock button and how to turn off an iPhone if the power button does not work.

Shutdown using charger

If your iPhone is locked, you need to “wake up” the sensor before turning it off. For this we use a charger. Connect your phone to your original charger or power bank and the screen will come to life. You can now turn off or restart your phone using the Assistive Touch tool. In principle, you don’t need the charger itself to turn it on; there is a way to use only the USB cable from it. Connect the iPhone to the computer and wait - the PC will detect the phone and turn it on.

How to turn off your iPhone using Assistive Touch

Assistive Touch is a software tool for controlling the device without using physical buttons, as well as setting up quick access to applications and functions of the smartphone. The option is enabled in the phone settings: “Settings” – “General” – “Universal Access” – “Assistive Touch”. Slide the main switch and a translucent control button will appear on the screen. When pressed, a set of functions opens, including screen locking. If it is not there, then return to the settings of the Assistive Touch tool, in the “Top-level Menu” section, select “Lock screen”. The principle of operation of the on-screen function is the same as its physical counterpart - pressing once will lock the screen, and if you hold it for several seconds, the smartphone will turn off.

How to reboot iPhone without a button

With the Assistive Touch function, you can also reboot your smartphone. In the menu settings, enable the “Reboot” item - the corresponding icon will appear in the opening set of the main Assistive Touch control on the phone screen.

USB message connected

Some users indicate that they detect their Galaxy A70 when they take it out of their pocket, even if it was previously locked, while Gold reports a persistent USB cable connecting and unplugging in the notification bar, which causes the screen to turn on.

Clean the connector

Special message “connect USB connected / connect USB disconnected”. There are two solutions that work in this case that we were able to test with affected users. The first is to clean the USB-C connector, which is sensitive to dirt and triggers false alarms if it's dirty or dusty inside. After cleaning, we can restart the computer and turn it on again to check if the problem is gone.

Original cable?

The problem is also reported by those users who do not use the original cable of the device. The solution is to buy again or make us with the original Samsung charging cable, since several people have solved the problem this way.

Causes of failure

First you need to determine what caused the breakdown. If your mobile phone gets wet and the button does not respond to pressing, you should immediately disassemble the gadget and dry it with a hairdryer.

If the device turns off unexpectedly, you can resuscitate it by long pressing the Power button.

Perhaps the system crashed and the phone turned off the OS. If the key was damaged after a fall from any height or simply due to frequent use of the gadget, then you should not immediately run for a new device or look for the nearest repair service center. We will give several ways to restore the device without using this button.

Temporary solution to the issue

iPhones 4 and 5 have AssistiveTouch, which displays some system buttons on the screen.

To enable and use it, do this:

• Go to settings, open the “General” section, then click on “Universal Access”.
• Now click on "AssistiveTouch". In the window that opens, you just need to move the switch next to the inscription “AssistiveTouch” to the “On” position, that is, so that it is green and the circle is on the right side.

After completing the steps described above, there will always be a black square with a circle inside on the screen. If you click on it, you can choose what you want to open or what button you supposedly need to press. In addition to the Home button, there are also Favorites, Device, and Siri. If you swipe in any direction, buttons for locking (which is what we need) and rotating the screen, increasing and decreasing the volume and “More” (additional functions) will also appear.

Your model may only have one of the two screens shown in Figure 2.

As you can see, AssistiveTouch really replaces some buttons and this function will be very convenient in case one of the keys fails. But it's better to replace the button.

If for some reason you do not have the opportunity or desire to go to a service center, you can try to perform the replacement yourself.

How to enable screen lock on Android

The Android operating system contains a whole set of functions for locking the screen. This is a pattern key, a digital PIN code, a multi-character password and even a fingerprint. To activate protection, you need to go to the OS settings, select the best option and configure it correctly. By default, the display lock is removed with a simple swipe. However, this method is considered unreliable because by swiping the screen, anyone can access the contents of the smartphone. Therefore, it is advisable to replace it with a more reliable and safe one.

Graphic key

This method of protection is the most common. Its essence lies in the use of a unique pattern that the user creates in a grid consisting of nine points. By connecting them in a certain sequence, he gets a drawing known only to him. To configure the key, you need to follow a simple algorithm:

• Open “Settings” of Android;
• Select the “Security” category;
• Go to the “Screen Lock” tab;
• Select the “Graphic key” option;

• Create a defensive combination in a grid of dots;
• Re-enter the key to confirm correctness;

• Choose a mode to display notifications on the lock screen.

To log in using this method, the system gives 5 attempts, after which it blocks access, which can only be restored through a Google account.

A graphic key is the simplest and most reliable protection option. To correctly identify a pattern consisting of only 4 positions, a fraudster will need to go through 1624 combinations, and from 9 points – 140704! It is estimated that the various connections of the dots contain a total of 389,112 compositions, and if you spend 1 second entering each of them, it will take 106 hours.

Fingerprint

To increase the security of data protection from theft on the vast majority of mobile gadgets of the latest generations, the protection functions have been supplemented with a new type - a special sensor for scanning a fingerprint. This method is completely reliable because the screen turns on only after the system identifies the unique papillary line pattern on the owner's finger. This option has a great advantage - you do not need to remember a password, code or graphic pattern. The only risk of using a scanner is breaking it (or losing a finger).

If your smartphone has a similar sensor, setting up protection will take no more than a minute. For this you will need:

• Open “Settings”;
• Go to the “Security and Privacy” section;
• Select the “Fingerprint” function from the list.

On the control page, you will need to activate the option by moving the slider to the right, and then create several fingerprint IDs so that the device remembers them and later allows you to turn on the device using them.

In order to increase the reliability of protection, you can connect any other locking option (password, code, pattern) in parallel with the scanner.

PIN code

Those who trust numbers more than complex patterns made up of dots will enjoy another locking method - using a four-digit numeric PIN. You can activate this protection method as follows:

• Enter “Settings”;
• Open the “Security” section;
• Find the category “Screen lock”;
• Select the “PIN code” protection option;

• In the special field, enter 4 digits in sequence;

• Re-enter the four-digit code for verification;
• Choose a mode to display notifications on the lock screen.

From now on, you can remove the screen lock only after entering your PIN code.

Password

Based on the number of combinations, this method is recognized by users as the most reliable. The password must have a minimum of 4 and a maximum of 17 characters. Taking into account the fact that in its compilation it is allowed to use mathematical signs, numbers and letters (in Latin or Cyrillic) in different registers, it is possible to create multi-million dollar combinations. Therefore, choosing the only correct sequence can be extremely difficult even with the help of special utilities.

To set a password, you should perform similar manipulations:

• Enter the settings menu, open the “Security” section, and go to the screen lock tab.
• This time select the “Password” option;
• Enter a unique combination in the special field;
• To confirm correctness, duplicate it again.

Finally, specify the option for displaying notifications on the screen.

Using the app

To activate the Lockscreen feature, Google offers many convenient applications available for download in the Play Store. You can configure protection correctly using the MagicLocker application as an example.

• Install and launch the program by tapping the icon on the desktop.
• After skipping several pages of information, go to the “Complete action using” page and select “MagicLocker”.

• Open the settings menu to select one of the protection options.

In addition to standard options (cipher password, pattern), the developer suggests using vibration or menu buttons. At the same time, it allows you to customize the lock screen theme as you wish.

Causes of malfunction

Apple smartphones have only a few buttons. The main one is the power button. It is she who is responsible for ensuring that you can turn on the device and start using it. You also have to press it to lock and unlock the screen.

A broken button on an iPhone can be caused by the following reasons:

• mechanical damage
• failure of the cable (then a new cable is needed)
• liquid entering the device
• button sticking
• software failure in the operating system without visible damage to the button

The button may get stuck and stop working after pressing hard, so you shouldn’t make a big effort when turning on or locking the screen or pressing hard.

With a faulty “Power” key, you can use the iPhone for its intended purpose, but the comfort of use will be greatly reduced.

Password

So, let’s say that you installed the program for Android, then entered your code, with which you can unlock the device’s screen and start using it. It happens that the password flies out of your head, and after that real panic begins. In fact, there is no need to panic, since there are currently several working methods with which you can quickly and easily resolve the issue of how to remove the Android screen lock. Below we will give you several methods if the access password does not work and you cannot remember it.

The main reasons why the iPhone 5 button may stick:

• The presence of a large amount of dust inside, as a result of which the interaction between the contacts is disrupted. In this case, to return the device to functionality, it is enough to clean the contacts. On average, this procedure takes no more than fifteen minutes.
• The smartphone has been exposed to moisture or water, causing moisture to penetrate the contacts. In this case, corrosion occurs, which impairs the functionality of the button.
• Manufacturing defect. In the event that the iPhone button does not work precisely for this reason, the repair will be carried out free of charge in any case. To do this, you need to contact one of the official showrooms of the manufacturer.
• Shocks, falls and other mechanical damage. In this case, it is necessary to completely disassemble the device in order to determine the nature and extent of the malfunction, as well as check the functionality of all other elements of the iPhone.

One of the most obvious signs that the iPhone 5 button needs repair or replacement is the fact that the device does not respond in any way to attempts to lock it or put it into sleep mode. Often, the user can hear the characteristic sounds that the iPhone makes when turning on or locking, but the process itself does not occur.

If the device is under manufacturer’s warranty, and the breakdown was not the result of improper or careless handling of the smartphone, then its owner can count on free repairs. All cases for which warranty free repair of devices is intended are indicated in special lists from official Apple representatives. If the cause of the button failure was the careless actions of the iPhone owner or the warranty period has already expired, then you will have to pay a certain amount to repair the button.

Guarantee of fast and high-quality repairs

The service center employs qualified specialists who have extensive experience in restoring the functionality of washing machines of different brands. The company's main advantage is performing diagnostic and repair work at the customer's home. Employees go to the address specified in the application with the necessary equipment and tools to promptly carry out door repairs and other operations. Before departure, the arrival time is agreed with the customer.

Thanks to our own spare parts warehouse, there is no need to pre-order or wait long for parts to be delivered. As a result, it is possible to significantly reduce repair time. Masters perform operations of any complexity to replace the hatch and electronic modules. Clients can always count on specialist advice. Original spare parts are used in the work. We work from 7:00 to 23:00 without weekends and holidays. You can call an engineer at your home by phone or online. We will be happy to help you.

Replacing the power button

To fix a problem with the power key, you need to replace either the button itself or the electronic key on the internal board that transmits the signal.

Replacing the outer element can help if the element has fallen out of the housing, is cracked, or has a cavity in its base where the stiffeners have broken. The procedure is only available if the user can independently disassemble the device body. To carry it out, you must have a similar physical key from the donor device or purchased in a store. It is enough to disassemble the case and install the button in the appropriate grooves.

If the problem lies in the electronic component, or the smartphone case cannot be disassembled at home, then it is better to contact a specialist.

Problem after replacing iPhone screen

If the iPhone screen does not go dark during a call after replacing the display on the phone, then you should try one unusual method, which often led to a solution to the problem:

1. In order to begin the solution, you need to carefully disassemble the iPhone.
2. The next thing we will need is a piece of transparent tape or rubber band about 5-6 mm long.
3. When everything is ready, you need to try to attach this piece between the light sensor and the proximity sensor.

This unusual and common method can solve your problem.

How to turn off your iPhone using Assistive Touch

1. On the icon you need to “tap” the Assistive Touch function menu.

2. In the menu, “tap” the “device” icon, then on the “screen lock”, long “tap” until the “o” buttons appear.

3. Then, on the “turn off” button, “swipe to the right”, after which it starts to turn off.

4. To turn on the faulty button, connect the iPhone to the computer with a USB cable.

Apple periodically releases new versions of the iPhone. But users, due to habits or simply lack of time, use smartphones for quite a long time. It is human nature to get used to some everyday things, and it is not convenient to part with the established rhythm. This happens with fairly durable iPhones.

Despite such durability, problems still occur. Various types of mechanical breakdowns simply knock you out of the established operating mode. One of these problems is the breaking of buttons or one button.

Let's look at troubleshooting using a specific example - this is a self-repair of the iPhone 4s power button. Let's start by trying to find out the cause of the breakdown. The problem in question with the Power button occurs for various reasons. This, and factory defects in iPhone 4s components, mechanical damage, shock, wear and tear after the device has been in use for a long time. Users often contact the service center on this issue, due to the design of the power key and the fragility of the mechanism of the associated elements. These are spring contacts and a cable that make our power button work. The fact is that in the complete set of the device, namely the actuating elements, there is a black plastic part resembling a tubercle. This element is fragile and breaks if dropped or subjected to other mechanical impacts not intended for the device. In this case, the fragile element of the iPhone button breaks off or crumbles. Of course, if it is absent, the button will no longer function.

How to turn on your smartphone

When the button breaks and the smartphone does not work, but you urgently need to turn it on, there is only one proven method. To do this, you will need a power outlet and an iPhone charger.

• connect your smartphone to the charger
• plug the charger into the socket
• wait 10-20 minutes if the battery has been completely discharged

Connecting a switched off iPhone to a charger will turn on the device. If this does not happen even after 20 minutes of charging, and you see a black screen, you should exclude damage to the accessories. Check to see if the socket, wire, or charger itself may be broken. Sometimes the cause of the problem lies precisely in them.

Sometimes you can try a hard reboot. To do this, you need to simultaneously hold down the Power button and the Home button. You must hold the button for 12-20 seconds until the Apple logo appears on the black screen. This method will not work on a faulty button, especially if it is deformed or does not work due to mechanical damage.

How to fix a key

All the recommendations provided above for starting the iPhone if the faulty Power button does not work are a temporary solution to the problem. If the button on your iPhone breaks down due to mechanical damage or a software failure of the operating system, you should contact an experienced technician who offers an affordable repair cost.

You will also need the help of a repair specialist if the button begins to stick after pressing hard. Intervention on your own will only make the problem worse.

A technician with a low repair cost will conduct a thorough diagnosis of the device to determine why the key broke. Our specialists provide the following types of repair services:

• cable replacement
• replacing the button itself on an iPhone
• Troubleshooting operating system software

A new cable after mechanical damage or moisture will eliminate the problem of a faulty button. The wizard will also make all the necessary settings if the button breaks due to a software glitch and it does not work. The cost of repair depends on the phone model and the reasons why the key refuses to work. After replacement, do not press the key too hard to avoid repeated damage.

Troubleshooting

You are not the first, nor will you be the last user whose buttons on an iPhone do not work, regardless of the model. Moreover, different buttons can break - lock (on) or volume (+/-).

What is the reason why iPhone buttons do not work? It’s unlikely that anyone will tell you a definite answer. This may be due to the smartphone falling and hitting one of these buttons. Breakage can also occur due to pressing the button too hard, or due to the use of low-quality components during assembly. In general, anything is possible.

We decided to get to the bottom of the truth and show through practical experience how you can fix the lock button yourself. Read about it below.

Why is the iPhone power button not working?

The answer to this question lies inside the smartphone and is associated with the physiology of its device. The button itself (on the end of the iPhone) cannot break, since it is a piece of iron. Underneath there is a cable with small spring contacts; they are the ones that fail.

The top picture shows a spring contact with a tiny black plate in the middle. This little pimp is the root of all troubles. The thing is that over time (as a result of strong pressure or blows) this small black tubercle crumbles and falls off. And without it the button does not work.

That's the whole problem. Now the main thing is to deal with the repairs. It all depends on whether you are ready for the expense or want to repair the phone yourself.

Home button repair methods

If Home works intermittently, slows down and does not always respond to user actions, it most often requires repairs at a service center. Let’s assume that there is no time for this; we need to bring the device back to life now. There are several simple and effective ways you can try:

• Calibration
• Correction of the position of the standard connector.
• Cleaning the contact pad and lubricating it if there is mechanical contamination.

It's not as difficult as it looks

The Internet is full of “instructions for dummies”; the main thing is to follow them and carry out manipulations with caution so as not to aggravate the situation. At the bottom of the article there is a video with instructions, be sure to read it

Home Button Calibration

Calibrating Home on iPhone is an effective method of “treatment” if the cause of the problem is software glitches. It is done through a simple algorithm:

• You need to activate any application on the gadget.
• Then you need to hold down Power until the shutdown window appears.
• Next, you should release Power and press the Home key, after which the shutdown window should disappear.

With a high probability, the device will return to its previous operating mode. Apple devices are prone to small system bugs that are fairly easy to fix.