What does error code 40 01 mean in Sberbank Online?
Before you try to fix errors that occur in the application, it is worth knowing the reason for their occurrence. Typically, the pop-up window contains brief information about the problem that has occurred. All possible failures in the operation of the Internet banking system are divided into groups. Each of which is assigned its own code. Previously, we considered similar cases associated with error 01-01, as well as code 20-01. In most cases, account owners can deal with them on their own.
Error code 40 01 indicates a poor or missing connection to the bank server. That is, the problem lies in the connection to the global network. Since Sberbank Online operates in a client-server structure, its trouble-free operation directly depends on an efficient communication channel between the client’s device and the credit institution’s equipment.
Sorry, flash to this stable version is not allowed…
If you have downloaded the latest version of MIUI 12, you may receive the following error message when trying to install:
Can't verify update. Sorry, flash to this stable version is not allowed.
Translation : I can't check the update. Sorry, firmware up to this stable version is not allowed.
In this case, the following message is displayed:
This usually happens when you update to an unsupported firmware version. Download the required version and install it. Then it will be possible to update to the latest MIUI for your smartphone.
Reasons for the occurrence of a message with code 40-01.
So, this window appears when the client application cannot connect to the main server device. But everything would be much simpler if it weren’t for the multiple causes of network faults. In turn, the most common options are:
The subscriber's mobile phone is faulty:
- Wi-Fi is disabled, as well as mobile data transmission;
- Hardware failure of the wireless communication module;
- A version of Sberbank software has been installed that is no longer supported;
- The device is infected with Trojans or other malicious programs;
- The operation of the bank application is blocked by third-party utilities.
Internet gateway is faulty:
- The network device (router, access point, etc.) is frozen or has incorrect settings;
- A firewall or proxy server blocks ports 9443 and 443, which are necessary for the normal operation of the application.
Internet access services are not paid for:
- If a subscriber connects to the network using the mobile Internet, then a zero or negative balance may cause the suspension of the provision of the corresponding services.
- If the provider’s service channel is used to access the Internet, then in the case of an overdue subscription fee, access may be “frozen.”
ROM is in beta testing...
Like all previous shell releases, MIUI 12 is also going through a beta testing phase, which precedes the release of stable versions.
When you try to install the beta version, you may receive the following error:
Can't verify update. ROM is in beta testing, make sure you have signed in with a beta authorized xiaomi account.
Translation : I can't check the update. The version is in beta testing, please make sure you are logged in with an authorized Xiaomi beta tester account.
On the smartphone screen the error looks like this:
This firmware version is intended only for members of the Mi Pilot testing team and is intended to evaluate the performance of the update and identify possible errors.
You need to wait until stable MIUI 12 firmware is released for your device. Or become a beta tester.
How to fix error code 40 01?
As you can see, unlike errors 60-02 and 30-02, which can occur due to malfunctions in the bank’s information systems, error code 40 01 in Sberbank Online appears solely due to “overlaps” on the user’s side. To resolve this problem, you can follow the following sequence of actions:
1. Check whether communication services have been paid for. Namely, whether the phone balance has been replenished or whether money has been deposited into the account under an agreement with the provider.
2. Turn on the Wi-Fi module and connect to a wireless network. Make sure you have free access to the World Wide Web.
3. Reboot the router and check its settings. In particular, whether any ports are blocked for security reasons.
4. Try to log into your personal account from another device, and, if possible, through a different type of connection (mobile Internet, another router, etc.). It is worth monitoring the signal level. If it is weak, then it is better to change the location closer to its source.
5. Run a virus scan on your device. In addition, it is better to do this sequentially with two or three different antivirus programs. Because one option does not always recognize all threats.
6. Temporarily disable all third-party programs that affect the operation of the network.
7. Clear the mobile application cache.
8. Reinstall Sberbank Online on your phone.
FLASH TOOL
During the process of flashing Android devices using the SP Flash Tool, errors periodically occur, which often take quite a lot of time to resolve on your own.
For your information and convenience, a selection of the most common error codes has been made with a detailed description and options for solving and eliminating them.
Errors
| Error code | Name |
| 1002 or 0x3EA | S_INVALID_ARGUMENTS |
| Description of error 1002 and its solution Incorrect Scatter file. For example, in the scatter file the PRELOADER and DSP_BL blocks are disabled | |
| 1003 or 0x3EB | S_COM_PORT_OPEN_FAIL |
| Description of error 1003 and its solution Problem with the port. For example, an error may appear if COM ports are disabled in the BIOS. Even if the COM port is virtual and the physical port is USB. In this case, you will not see the equipment on which PRELOADER drivers are installed. The problem may be with the USB cable, in which case replace the cable. If the computer's USB port is faulty, you need to plug the cable into another port. Theoretically, it can occur in UART USB port mode. The port was visible, it was selected in the Flash Tool settings, the program wrote it to the INI file, after which the system was rebooted with the port disabled, and the Flash Tool was immediately launched without selecting the port.. When, after passing the red bar to 100% as a result of the firmware, the operation buttons become available for clicking again, but neither the error message nor the window with a green circle appears; this error or a similar one will occur, the code of which is 1013. In this state, Flash Tool does not close the COM port, and attempting to restart any operation by reconnecting the device will cause an error. If the program has entered such an undefined state, then you need to close it and start it again | |
| 1011 or 0x3F3 | S_NOT_ENOUCH_STORAGE_SPACE |
| Description of error 1011 and its solution Occurs when the size of one of the parts of the firmware exceeds the size of the space allocated to it. Usually this is a kernel or recovery block. This error sometimes occurs on unfinished versions of Flash Tool. Change the version of the firmware you are using | |
| 1012 or 0x3F4 | S_NOT_ENOUGH_MEMORY |
| Description of error 1012 and its solution Use a more recent version of the firmware | |
| 1013 or 0x3F5 | S_COM_PORT_OPEN_FAIL |
| Description of error 1013 and its solution The error is similar to error 1003 . Solutions must be sought according to the same principle. Changing the firmware version or flashing the device firmware with the battery disconnected may help. | |
| 1018 or 0x3FA | S_UNKNOWN_TARGET_BBCHIP |
| Description of error 1018 and its solution Use a more recent version of the firmware | |
| 1022 or 0x3FE | S_UNSUPPORTED_VER_OF_DA |
| Description of error 1022 and its solution Use a more recent version of the firmware | |
| 1040 or 0x410 | S_UNSUPPORTED_OPERATION |
| Description of error 1040 and its solution Scatter file is not suitable for the device. For example, the file name contains version number 6777, and device version 6555 | |
| 1041 or 0x411 | CHS_ERR |
| Description of error 1041 and its solution You need to go to the Help , click Open Logs Folder and delete all logs. Go to the folder with the firmware and delete the Checksum.ini | |
| 2004 or 0x7D4 | S_BROM_DOWNLOAD_DA_FAIL |
| Description of error 2004 and its solution The problem may lie in the version of the flash drive. Download the version that has the SEC designation at the end. The error may occur if the operating system has many USB drivers installed for different devices. Use the USBDeview to remove installed USB drivers and flash the firmware using the Flash Tool. + or - key may help . If the above methods do not help, after the error appears, you must immediately close the error window and immediately click the download again | |
| 2005 or 0x7D5 | S_BROM_CMD_STARTCMD_FAIL |
| Description of error 2005 and its solution The error can occur on MTD devices if the checkbox is not checked when selecting the Download on the PRELOADER or DSP_BL blocks. Download mode, the checkbox is checked on the PRELOADER or DSP_BL blocks, you need to uncheck it from these blocks. If these blocks need to be flashed, then connect the phone in BOOTROM mode. When selecting ReadBack , Format or MemoryTest, you need to connect the device in BOOTROM mode. You can try flashing the device with the battery disconnected | |
| 2020 or 0x7E4 | S_BROM_CHKSUM16_MEM_RESULT_DIFF |
| Description of error 2020 and its solution In the Flash Tool settings, force the checkbox to indicate that the device is without a battery. After this, connect the device via test point, but with a battery | |
| 2035 or 0x7F3 | S_BROM_CMD_JUMP_DA_FAIL |
| Description of error 2035 and its solution After pressing the Download , connect the switched off device to the computer with the volume buttons pre-pressed | |
| 3001 or 0xBB9 | S_DA_EXT_RAM_ERROR |
| Description of error 3001 and its solution The error may be related to the connection. Check the cable, reconnect the cable to another USB port | |
| 3012 or 0xBC4 | NAND_FLASH_NOT_FOUND |
| Description of error 3012 and its solution The problem is related to the detection of the device’s flash memory. Use a different version of the flash driver, because... As different versions are released, information about flash memory is updated. If the above option does not help, try flashing the device on another computer, because... There are problems that do not allow you to correctly determine the memory on a specific machine | |
| 3013 or 0xBC5 | S_DS_SOC_CHECK_FAIL |
| Description of error 3013 and its solution It is possible that the Uboot . Uboot is an operating system and driver loader for initializing basic hardware such as display, processor, GPIO. An error may occur if the path line where the program or firmware is located contains Cyrillic or incorrect characters or hieroglyphs. It is permissible to place the program and firmware file only in a path that consists entirely of Latin characters. An example showing incorrect file placement: C:\Users\User\Desktop\Firmware\Tablet Firmware\ | |
| 3054 or 0xBEE | S_DA_NFB_BOOTLOADER_NOT_EXIST |
| Description of error 3054 and its solution Use a different version of the firmware. Try replacing the firmware version from version 5 to version 3 | |
| 3066 or 0xBFA | S_DA_HANDSET_FAT_INFO_NOT_FOUND |
| Description of error 3066 and its solution Occurs during automatic formatting. You must set formatting addresses manually | |
| 3144 or 0xC48 | S_DA_EMMC_FLASH_NOT_FOUND |
| Description of error 3144 and its solution The error occurs if there are problems with the device hardware. It can also occur if the Scatter file does not match the device. For example, emmc is present in the name, but the device actually has MTD flash. There is a possibility that the problem will be solved if you use a different computer and operating system. It is preferable to use a computer running Windows XP with newly installed drivers | |
| 3149 or 0xC4D | S_DA_SDMMC_WRITE_FAILED |
| Description of error 3149 and its solution Use a different version of the firmware. If you are flashing version 3, try version 5, or vice versa. Select Format all + download . You need to reinstall the drivers for the device and ensure that the device is correctly displayed in Device Manager as MTK USB PORT. Launch Flash Tool, uncheck all items except PRELOADER and flash in Download . If progress is made but an error occurs at the end, then we make sure that we will only flash PRELOADER. At the top of the Flash Tool window, next to the Download , click the Format . The formatting settings window will open with Auto and Manual . In Auto there are two settings, check the top box and press OK. Formatting will begin. After formatting is completed, flash PRELOADER again. After successfully flashing PRELOADER, flash the device completely | |
| 3168 or 0xC60 | S_CHIP_TYPE_NOT_MATCH |
| Description of error 3168 and its solution Incorrect scatter file. Use the Scatter file from your device | |
| 4001 or 0xFA1 | S_FT_DA_NO_RESPONSE |
| Description of error 4001 and its solution Change the USB port and move the Flash Tool to the root of the disk. The Download Agent may not have CPU/flash information, so use a more recent version of the firmware. The error may be hardware, for example due to a failed flash memory | |
| 4008 or 0xFA8 | S_FT_DOWNLOAD_FAIL |
| Description of error 4008 and its solution Use a different version of the firmware. There is a possibility that replacing the version with an older one will help. The problem may be with the USB cable, in which case replace the cable or USB port. Perhaps the battery ran out during the firmware process. Charge the device and try flashing the firmware again. You can try removing the battery from the device and try flashing it without it. Try formatting your device | |
| 4009 or 0xFA9 | S_FT_READBACK_FAIL |
| Description of error 4009 and its solution In addition to reading errors in the device itself, the error can be observed in the event of errors in the computer’s file system. For example, there is not enough disk space, or the file cannot be overwritten because it is blocked. In order to understand the reason, you need to look at the Flash Tool log | |
| 4010 or 0xFAA | S_FT_FORMAT_FAIL |
| Description of error 4010 and its solution It is recommended to change the firmware version to version 5, it is highly advisable to start with version 5.1352.01 and try to flash the device through the Firmware upgrade . The firmware must be original for the device and contain all the blocks. Try changing the firmware cable to a better one | |
| 4032 or 0xFC0 | S_FT_ENABLE_DRAM_FAIL |
| Description of error 4032 and its solution An error may occur when flashing firmware on a device with an MT6589 processor. To fix it, format the device using the Format . Do not format if you have a device with an MT6575 or 6577 processor. After formatting, flash the device with all the checkmarks by clicking the Download . You can try reinstalling the drivers and formatting again. Run the firmware if the previous attempt was unsuccessful. If all else fails, try changing the firmware version. It is recommended to start with version 5.1352.01. The error is due to an invalid PRELOADER block. You need to find the native PRELOADER and flash it. If flashing the firmware using the standard method does not bring results, you may have to flash the device through a testpoint. This error may be caused by a low battery charge. You can try to solve the problem by shorting pins 4 and 5 on the USB connector | |
| 4037 or 0xFC5 | S_FT_FS_READ_FAIL 0xFC5 |
| Description of error 4037 and its solution An error may occur if the path line where the program or firmware is located contains Cyrillic or incorrect characters or hieroglyphs. It is permissible to place the program and firmware file only in a path that consists entirely of Latin characters. An example showing incorrect file placement: C:\Users\User\Desktop\Firmware\Tablet Firmware\ | |
| 4050 or 0xFD2 | S_FT_NEED_DOWNLOAD_ALL_FAIL |
| Description of error 4050 and its solution Occurs when the block sizes in the PMT and the Scatter file do not match. In general, this error can be resolved by loading all blocks, after which the size in PMT should change to the correct one. You can try changing the firmware version | |
| 4058 or 0xFDA | S_FT_GET_MEMORY_FAIL |
| Description of error 4058 and its solution The error occurs when there are problems with flash memory. It is not recommended to solve the problem yourself. Options for eliminating the error: warming up the flash memory chip with a soldering hair dryer at high temperature, approximately 400 degrees Celsius. You will probably have to replace the chip from the donor board or with a new one | |
| 5002 or 0x138A | S_INVALID_DA_FILE |
| Description of error 5002 and its solution When setting up the Flash Tool Download Agent, you must select the one included with this version of the firmware. Selecting other agents results in this error | |
| 5007 or 0x138F | S_FTHND_FILE_IS_NOT_LOADED_YET |
| Description of error 5007 and its solution The error usually occurs if in the Flash Tool there is a checkmark on a block to which the path is incorrectly specified or is missing. To eliminate it, you must specify the correct path to the required firmware block. Also, if this error occurs, use a different version of the firmware, for example v5.1352.01 | |
| 5054 or 0x13BE | S_DL_GET_DRAM_SETTINGS_FAIL |
| Description of error 5054 and its solution The error is that the Flash Tool was unable to obtain the device's RAM settings. This may occur if a full reset was performed via the Flash Tool. An error may also occur during data exchange between the Download Agent and the device. If the driver does not work correctly, a transmission failure can occur only if you have a Windows XP operating system with a service pack lower than third. It is necessary to install the third service pack. In older versions, the usbser.sys has not been updated and there is no point in reinstalling it | |
| 5066 or 0x13CA | S_DL_PC_BL_INVALID_GFH_FILE_INFOR |
| Description of error 5066 and its solution Incorrect Scatter file. This may occur if you selected Scatter from a folder with files not prepared for the Flash Tool. You must select the correct Scatter file | |
| 5069 or 0x13CD | S_DL_PMT_ERR_NO_SPACE |
| Description of error 5069 and its solution The error most likely occurs due to a feature of flash memory. It happens that formatting, even low-level, does not have any effect. That is, in flash memory everything remains as is. If you do Format 1037 may appear and a message is displayed asking you to perform Download to create partition tables. Firmware Upgrade fails due to error 1037 . You can download only PRELOADER. Loading any other partition will result in error 5069 . The size of the FAT partition does not depend on the Scatter version. You can perform Manual Format , but within the UA Size. After formatting, trying to upload any partition again results in error 5069 | |
| 6045 or 0x179D | S_SECURITY_SECURE_USB_DL_IMAGE_SIGN_HEADER_NOT_FOUND |
| Description of error 6045 and its solution It is recommended to change the firmware version to version 5, it is highly advisable to start with version 5.1352.01 | |
| 6104 or 0x17D8 | S_SECURITY_SECURE_USB_DL_DA_RETURN_INVALID_TYPE |
| Description of error 6104 and its solution It is recommended to change the firmware version to version 5, it is highly advisable to start with version 5.1352.01 | |
| 6124 or 0x17EC | S_SECURITY_INVALID_PROJECT (6124), MSP ERROE CODE: 0 x 00 |
| Description of error 6124 and its solution There is a possibility that the error will disappear after flashing the native PRELOADER firmware via the Download . After that, flash the modified Recovery and full firmware | |
| 6126 or 0x17EE | S_SECURITY_SECRO_HASH_INCORRECT |
| Description of error 6126 and its solution The error often occurs on Huawei G610, Huawei G700, LG L60 Dual devices and is currently not solvable at home. Consequences: periodic reboot, deleted files remain in the device, and an error occurs when checking the memory for writing. The reason is that the device has a locked bootloader, which is why it is necessary to flash the unlocked SEC_RO for unlocking and further flashing. It all comes down to the fact that it is during the SEC_RO that this error occurs. It is recommended to replace the memory at a service center | |
| 8038 or 0x1F66 | SP FLASH TOOL ERROR/PMT changed for the ROM; it must be downloaded |
| Description of error 8038 and its solution To resolve the error, you must use the Firmware upgrade . Attention! The firmware must be specific to the device being flashed and contain absolutely ALL the blocks that are usually found in stock firmware | |
| 8045 or 0x1F6D | SP FLASH TOOL ERROR |
| Description of error 8045 and its solution The error is similar to 8038 , but in practice editing the Scatter file does not help. To solve the problem, you can contact a service center to flash the device using a programmer. At home, sometimes the firmware option works through the Download with all the boxes checked. You can also try changing the firmware version to version 5; it is highly advisable to start with version 5.1352.01. The problem may be hardware | |
| 8200 or 0x2008 | SP FLASH TOOL ERROR |
| Description of error 8200 and its solution The error occurs if you try to flash a device on one platform with firmware from another. For example, you have MT6577, and you are trying to flash the firmware from the device on MT6575. You can try changing the firmware version to version 5, it is highly advisable to start with version 5.1352.01 | |
| 8417 or 0x20E1 | SP FLASH TOOL ERROR: The load scatter file is invalid! |
| Description of error 8417 and its solution An error may occur if the path line where the program or firmware is located contains Cyrillic or incorrect characters or hieroglyphs. It is permissible to place the program and firmware file only in a path that consists entirely of Latin characters. An example showing incorrect file placement: C:\Users\User\Desktop\Firmware\Tablet Firmware\ | |
| Unrecognized ROM detected | |
| Description of the error and its solution The error occurs when the markup in the Scatter file and the device do not match. Most often it happens when the device was subject to custom repartitioning by changing the partition parameters in the EBR. At the same time, no one usually changes the Scatter itself. To eliminate the error, you must perform forced formatting with the parameters: Auto Format Flash and Format whole flash except Bootloader in order to initialize the device. Don't forget to backup NVRAM and IMEI . After formatting, you need to perform a full firmware via Download | |
| The application was not launched because it was not configured correctly. Re-installing the application may solve this problem. | |
| Description of the error and its solution Install the Microsoft Visual C++ 2005-2008-2010-2012-2013-2017 Redistributable Package. Also make sure that you unpacked the firmware to the root of the disk on your computer, and are not trying to run it from the archive | |
Attention
You perform all actions at your own peril and risk. The Flash-Tool.ru website is not responsible for damaged devices.
