How to enable IR port on Honor and Huawei? For many, this option seems outdated, but in practice it is being actively returned to phones. Many people don’t even suspect that their device has such a port. Although in 2021 it is often used to establish contact with other devices. What is an infrared port, how does it function, what does it affect, which models have it and how to find it - read on in the instructions for setting up the infrared port.
What is a universal remote control
It sounds complicated, but in fact, it is a simple device that creates signal pulses suitable for most TVs and set-top boxes.
Huayu, Gal, DEXP, Supra are considered popular and high-quality manufacturers of UE.
To configure them, special codes , which differ depending on the brand of TV, and you can view them on this page.
The universal model will fit a large number of common and popular manufacturing companies, for example, Samsung, LG or Philips.
Differences from a regular remote control
The original remote control and the universal one have two significant differences, which significantly increase the cost of the first - this is its “branding” and quality.
How to find out the TV code?
The code is necessary to be able to connect third-party devices with it. These include remote controls, smartphones or tablets.
It ensures device recognition and correct operation. Consists of a unique set of numbers that can be found in this file, as well as in the TV itself.
- supra remote control code
To do this you will need:
- login to YouTube;
- open settings;
- select the option to connect to your phone;
- after entering the “Connect manually” section, a blue code will appear;
- remember it or write it down.
Answers to popular questions
It's worth a try, but due to the outdated year of manufacture, the likelihood of successful synchronization is low. If the camera model is supported by the software, then yes, it is possible, there are usually no problems. This will require switching between equipment, there is no other way. This question is strictly individual. If you understand technology and are confident in your abilities, then try it. But for beginners, it is best to contact a service center for help. It is also important what exactly caused the breakdown. Did the crash occur after the phone was hit or dropped? At home, there is a chance to repair it. And if the breakdown is factory-made, it is better to take advantage of the warranty and the help of the store.
As you can see, remote control of equipment via a Xiaomi phone is simple and convenient, and setup requires only the Mi Remote application and strict adherence to the instructions.
Sources used:
- https://setphone.ru/stati/ik-port-v-smartfonax-dlya-chego-on-nuzhen-i-kak-im-polzovatsya/
- https://fb.ru/article/323097/ik-port-dlya-smartfona-chto-eto-takoe-kak-polzovatsya-infrakrasnyiy-port
- https://mi-faq.ru/kak-vklyuchit-ik-port-na-xiaomi.html
How to set up a universal remote control
Each device comes with instructions that describe the setup process in detail. We will look at setting up models from popular manufacturers.
Huayu
To configure it you will need:
- turn on the TV, point the control unit at it and simultaneously hold down the power and “Set” buttons;
- Watch the indicator carefully, it should be on all the time;
- use the volume control to set commands;
- To exit pairing mode, press the “Set” button.
Gal
Automatic adjustment:
- turn on the TV, point the remote control at it;
- hold down the button indicating the device type;
- after the indicator lights up, release it;
- press the power button on the UE, this will start an automatic code search;
- As soon as the TV turns off, you must quickly press “OK”, this will save the code in memory.
Sometimes the automatic search does not work well, so you need to configure it manually.
Manual adjustment:
- after turning on the TV and pressing the “TV” button, the indicator will light up;
- releasing it, enter the device code;
- after entering the fourth digit, the code will be saved in the device’s memory and the screen will go dark.
DEXP
Auto-tuning occurs according to the following algorithm:
- turn on the TV, point the CP at it, press the button indicating the brand of TV;
- hold down the “Set” button and hold until the indicator lights up;
- click on channel selection, automatic code selection will begin;
- Once the indicator goes off, immediately press the “OK” button to save the found code.
If the button is pressed too late, you will have to do everything again.
The advantage is that by searching through channels, you can regulate in which direction the search will be carried out.
- Universal remote control Selecline lm t006
Manual code entry must begin after pressing the “Set” button and the indicator lights up. Enter the numbers you found and click OK. The remote control will remember the specified combination.
Supra
Automatic configuration algorithm:
- turn on the TV, point the remote control at it and hold the “Power” button, release after the indicator lights up;
- If setup is successful, a volume control bar will appear on the screen
- Turn off the device using the Power button.
Manual remote control setting:
- find the code for your device in the previously mentioned article;
- turn on the TV, point the CP at it, hold down the “Power” button without releasing it, enter the found code;
- Only after the indicator blinks twice, release the power button.
If after setting up the universal remote control does not work, contact the seller or service center, there may be a defect.
First you need to double-check the codes and repeat the manipulations; sometimes mistakes are made during setup.
November 27, 2015 31 131282
Typically, a universal remote control (RC) is a small box with LEDs, circuits and buttons. It works because the infrared sensor on it transmits the required code to the same sensor in another device. Using it, for example, you can adjust the sound volume, switch channels, change the power of a particular device, and much more. A universal remote control differs from a regular one in that several electrical appliances can be recorded into its circuit at the same time. Today we will look at how to set up a universal remote control for your TV.
How to create a Huawei account
In order for the user to download applications from AppGallery, he will need to create a Huawei account. On the screen of your 9A or 9S smartphone, select the icon with the name of the application. A form will appear where you need to write down your phone number or email address.
More about Huawei: Huawei P20 Lite 64 GB – buy a mobile phone, price comparison of online stores: photos, specifications, description | E-Katalog
During registration, the user will also need to indicate their date of birth. If a phone number was used in the account creation form on Honor's phone, an SMS with a confirmation code will be sent to it. It will need to be entered into the form. If you used an email account, a letter with a code will be sent to it.
Setting up a universal TV remote control
It will all be quite simple to do. It’s possible that nothing will work out the first time, but don’t despair right away.
If you haven't purchased it yet, you can buy it in China at a very low price.
- Remote control for Huayu DVB-T2+3 VER.2018-2 universal remote control for digital set-top boxes DVB-T2 receivers
Link to this product: aliexpress-upd
Setup includes several methods:
- Press and hold SET (TV) until the red LED is active, then once on POWER, then enter the TV code and the indicator should go out. If the indicator does not go out, you must press the MULT button after entering the code.
- Dial the desired number and simultaneously hold SET (TV) and POWER.
- Hold SET (TV) until the red LED lights up, then press POWER once, point the remote control towards the turned on TV and wait for its response. Then press the MULT button.
In the first and second cases, it is important to know the exact model of your TV. Once you know the model, find its code in the instructions. Often there are several numbers for one model. If you don’t have instructions, then below is a table of codes for various TVs and more.
In the event that the device does not start working, you need to try entering a different number for your existing TV model, or use method 3.
If you don’t want to set up the remote control yourself or it doesn’t work out, then you can ask an employee of some electronics store; you just need to know the TV code.
Xiaomi smartphones with IR port
List updated 08/17/19
IrDA is not present in all models, but the list is still extensive and includes both budget and flagship models:
- Redmi Note 2;
- The entire Redmi 3 line;
- The entire Redmi 4 line;
- The entire Redmi 5 line;
- The entire Redmi 6 line;
- Redmi 7, Redmi Note 7;
- Redmi S2;
- Mi 4;
- The entire Mi 5 line;
- Mi 6;
- Mi 9, Mi 9 SE;
- Mi A1, Mi A2, Mi A2 Lite, Mi A3.
- Mi Max 2, Mi Max 3;
- Mi Note 3;
- Pocophone F1;
If your model is not on the list, then it can act as a remote control via a Wi-Fi connection, but it will only be effective in relation to TVs from Mi TV and Mi Box set-top boxes.
Setting up a universal remote control without a code
In this method, you will have to do the setup yourself and without entering a number. To do this, you first need to turn on the TV. Then on the remote control you need to hold the button called Set or maybe SETUP (TV) for a few seconds until the red sensor turns bright. Point your all-in-one device towards the TV and press the green POWER button. The indicator should start blinking, which means the device has started to select a code for your TV receiver. We are waiting for some reaction to occur on TV. For example, the sound turns off, the channel changes, etc., this reaction depends on the brand of the TV or even on the remote control. After waiting for a reaction, you must immediately press the MUTE button.
Pdf instructions for setting up the Rolsen remote control
Below is the official manual for setting up Rolsen: RRC - 200, RRC - 300. Perhaps it will be suitable for other devices.
After waiting a few seconds, the indicator will go out and you can use it. If it doesn’t work, then try after turning on the TV and after selecting a channel, turn off the sound, and then do the same steps as described just above. If you did everything correctly and your devices are really working, then the setup should be successful.
Universal remote control (Universal remote control) will help you not to get confused in the pile of remote controls for home appliances. For example, you can combine all control devices for an audio system, set-top boxes and TVs under a common housing. However, before you can use these amenities, you first need to properly configure the universal remote control for your TV.
Setting up a universal remote control is not particularly difficult and follows the same principles, regardless of the device manufacturer. Yet each model's binding requires its own instructions.
Content
What it is
UPDU (used to replace a lost or non-functional TV remote control. If your TV remote control does not work, use the UPDU instead of a broken standard device.
The UPDU will also come in handy if the original remote controls for your device are difficult to obtain. Difficulties often arise when replacing original accessories for equipment. For example, the MTS remote control is sold only complete with a set-top box. Don’t buy a new console every time the remote control malfunctions. In this case, it makes sense to exchange the MTS for a product from another manufacturer. By now, there are already functional analogues of this device on sale that will do the job no worse than the original. Moreover, after setting up the universal remote control, it will be possible to control not only the TV, but also other household appliances.
IMPORTANT! To make the remote control as convenient to use as possible, purchase a remote control with a built-in LCD display or touch screen. Such models are more consistent with the needs of the modern user.
Setting up UPDU
Each UPDU requires preliminary binding to the device. It may not always be obvious how to set up a universal remote. Universal remote controls for LG TV are produced by the same company, but many other remote control manufacturers have a very distant relationship with the model of your TV. There is no remote control suitable for all TV models at once. Each TV and each remote control has its own unique features. However, common models of universal remote controls cover market demands for remote control devices for all popular brands of televisions.
Where to download the virtual remote control application
In many Honor and Huawei phones, the Virtual Remote application is already built into the Android operating system. You just have to find it on the main screen or in the “Tools” folder.
If your mobile device does not come with this utility, but does have an infrared port, you can find different download options on Google Play that can be used for their intended purpose and completely free. Let's describe some of them:
- Android TV Remote Control. Allows you to control TVs of any brand, as well as set-top boxes. Equipped with a user-friendly interface with a basic menu. On the touch panel, through the search, you can enter a text query or specify a voice command.
- Peel Smart Remote. It is indispensable because in addition to the virtual remote control it allows you to see a TV program. Automatically detects your Internet provider and leaves hints by channel.
- SURE Universal Remote. Universal remote control, can control any equipment. Supports Apple and Android TV and Chromecast.
- AnyMote Universal Remote. In this application you can combine all the remote controls you have in your home. There is also convenient functionality for creating templates, where several actions can be performed at once using one button.
What is the Hiboard program on Huawei and Honor, how to disable it
Determine which program suits you best and download through the online store using a Wi-Fi network or data transfer.
Setting up the SUPRA remote control
TV remote control SUPRA
Step-by-step instruction:
- Search online for codes for universal TV remotes that match your TV model.
- Turn on the TV.
- Point the remote control towards the screen and hold down the “POWER” button. Don't remove your finger; enter your TV code at the same time. When the indicator on the remote control blinks twice, release the button.
- The supra setup is complete. Check if the TV responds to pressing the remote control buttons. If the device does not respond to your actions, try a different code.
Automatic code search process in the device memory:
- Turn on the TV.
- Point the remote at the screen.
- Press "Power" and do not release your finger for 6 seconds.
- After 6 seconds, the indicator on the remote control should light up. At the same time, the volume setting symbol “VOLUME” will appear on the screen. After these signs of successful binding of the remote control to the TV appear, release the “Power” button.
- Check if your device is working properly.
Which Honor and Huawei smartphones have an IR port?
Before figuring out how to enable the infrared port on Honor and Huawei, you need to make sure that it is present on the smartphone. To do this, it is recommended to read the instructions describing the main characteristics of the device that were included with the phone equipment. But usually the sensor is built into the following models:
- Honor 3, 6, 7C, 8 Pro, 9 (including lite), 10 (including View);
- Huawei Mate 9 and 20, P9 Plus.
The full list may be wider; detailed information should be clarified before purchasing a gadget.
Setting up HUAYU PU
The “HUAYU” universal remote control is a convenient and cheap, and therefore widespread device.
It is very easy to set up. English instructions can sometimes be found right on the back of the HUAYU remote control.
- Press the "SET" button. This could be the top left button on the panel, or the bottom right button. In any case, the “SET” and “POWER” buttons we need are located along the edges of the device.
- Without removing your finger, also hold down the “POWER” button. The steady, continuous light of the indicator lights up indicates that the device has entered programming mode.
- Press the “VOLUME” button several times (see also the “VOL”, “+”, “>” symbols next to the “OK” button). Continue pressing the button successively until the “VOLUME” symbol lights up on the screen.
- When the “VOLUME” symbol appears, press “SET” twice, then release. This will exit setup mode. After exiting, the indicator should go out.
IMPORTANT! A similar sequence of actions can be applied to the UNIMAK remote control unit. HUAYU will perfectly replace a lost or irretrievably broken LG TV remote control.
What is IR port
The IR port (infrared port) is a kind of remote control that can be used by almost all modern devices. At the same time, there are no wires, no need to change batteries, and no individual charging is required.
With IrDA you can:
- Turn on/off the TV, change channels, adjust the volume, record programs.
- Change the intensity of the air conditioner and the jet flow.
- Work with a DVD player, camera, portable speakers and even kitchen appliances.
You can forever forget about a bunch of extra remote controls, about the fear of losing them, about faulty or worn-out buttons. Most popular electronics brands are supported, from Samsung to Asus . Thus, remote control will only bring pleasure and comfort.
