How to fix a phone charging socket?

A mobile phone is an excellent means of communication and a multifunctional tool that every person needs. That's why we charge our phones regularly and are afraid of being left with a dead battery. But over time, almost any owner of a mobile phone is faced with the fact that it begins to charge poorly or does not charge at all. Let's figure out how to charge the battery if the connection socket is broken.

How to fix a socket by changing position?

It is worth noting that it is impossible to repair the nest in this way.
This is an emergency measure in cases where you urgently need to charge your phone. Also take into account that if you use this method too often and put off going to the technician, the situation can only get worse. Sequencing:

Connect the charger to power and to your smartphone.
Try moving the cord in different directions. This way you can close the contact if it becomes loose.
If you managed to find the correct position and the gadget is charging, then try to fix it with something that you have at hand: be it a book or other heavy thing.

Before using this method, you must be sure that the problem is in the socket and not in the battery. Over time, the battery begins to hold a charge poorly or stops charging altogether. In this case, you just need to replace the battery, and not try to fix the supposedly broken socket. The charger itself may also be faulty, which can be easily checked by trying to charge the phone with another accessory.

Cleaning the iPhone charging socket with air

If the contamination is too strong, special tools may be required for cleaning - a mini vacuum cleaner or a compressed air cleaner. They are available to service center specialists, and the entire cleaning procedure takes no more than 15 minutes. In the same way, you can clean the iPhone speaker if you suddenly begin to hear your interlocutor worse. Moreover, it is inexpensive - our friends, the Apple Pro service, for example, offer a service - cleaning the iPhone speaker for only 500 rubles.

Do not try to blow out the dust yourself. Hot and humid air from the mouth can damage the contacts .

Have you ever cleaned the charging port of your mobile device? You can talk about your experience in our chat on Telegram.

Is it possible to repair the charging module socket?

How to fix the charging port on your phone at home? You need to figure this out thoroughly, then everything will work out. Careless use of a mobile device very often ends in some kind of breakdown that needs to be fixed. Sometimes the breakdown lies in the connector for connecting the power cable. In this case, you need to find out how to fix it, and for this you should familiarize yourself with the main causes of the defect.

The main reasons for device socket failure:

You can spill some liquid on the device or simply drop it thoroughly to disable this module.
Constant mechanical stress deforms the socket, which can make charging the gadget simply impossible - the plug will not fit into the connector or will dangle in it, in which case the socket will need to be replaced.
The contact pads may also bend, which will completely block access to electricity.

Let's talk right away about the worst thing - moisture.

Contact of a mobile phone connector with moisture is the most dangerous damage. Corrosion will start a chain reaction and all neighboring components will oxidize. This kind of defect can also damage the speaker, which is most often located in the lower part of the device. Also, the speaker itself allows moisture to enter the cable or connector. Therefore, even light rain can damage your phone.

The most important thing is to assess the complexity of the damage, since not all cases allow for home repairs. The best option is to use the services of a qualified specialist from a service center. This way you won’t risk breaking your device.

Is it possible to repair the device at home?

Very rarely restoration work can be carried out independently. It is best to find an alternative charging method for a while until you decide for yourself whether to repair it yourself. While you are saving the necessary amount for repairs in the workshop, read the instructions for charging a phone with a broken socket:

Insert the charger into your smartphone and plug it into the network.

Carefully move the cord and device in different directions. You may be able to close the contact and charge the device. If the mobile phone nevertheless detects the presence of a charger, then it is worth recording the found position

Books and other items can be used that can install the phone so that the power continues. Before carrying out all these actions, you should make sure that the problem is in the socket and not in the battery. Using your phone for a long time causes it to no longer hold a charge. In this case, you will have to get a new battery rather than deal with a “phantom” breakdown. If the problem is still in the nest, then repairs cannot be avoided. If the socket is moving away from the tablet or the USB input is loose, try changing the socket itself or replacing the cable.

If everything is fine with the connector now, but the problem of lack of energy in the battery still does not disappear, read about what to do if the phone does not charge when charging.

What to do if the nest is loose

Sometimes the smartphone does not respond to connecting the charger, what should you do in this case? One reason could be a loose charging socket. In this case, you need to move the phone and cable to close the contact and the device begins to charge. If successful, fix this position with books or other objects and wait until the device is fully charged. This charging method is temporary.

If, after searching for the desired position of the smartphone, charging does not start, you should find out what the problem is: in the charger, in the cable or in the connector.

To make sure that the charger is not broken, connect your smartphone to another charger. You can also use the USB connector of a laptop or computer to check. If charging starts, then there is a problem with charging. It's easy to check if the cable is working properly. To do this, you need to take another cord and try to charge from it. If both the charger and the cord are working, the connector on the phone is to blame.

If the socket is faulty, you can try cleaning it. To do this, you need to blow out the connector with compressed air. You can also use a toothbrush or toothpick, but you need to do this carefully so as not to further damage the connector.

The charging connector on the phone is broken - charge directly

If you don't know how to change the charging socket on your phone, you can try to recharge the battery without having to use the power socket. The method is relatively complex and requires some skills in working with electricity. The point is this:

You need to remove the battery from your phone. Cut off the insulation from the charger wire, expose the wires (unplug from the outlet). Strip the veins, determine where the plus and minus are. Find the corresponding terminals on the cell phone battery

It is important to observe the polarity of the wires and the device. Fix the wires and plug the plug into the socket. It is strongly not recommended to use this method if you are not 100% sure of your skills

You should not carry out manipulations when you are alone at home; there must be a person nearby who could help you in case of a possible electric shock. Please note that this connection option is not normal for the battery and can lead to breakdown or premature depletion

It is strongly not recommended to use this method if you are not 100% confident in your skills. You should not carry out manipulations when you are alone at home; there must be a person nearby who could help you in case of a possible electric shock. Please note that this connection option is not normal for the battery and can lead to breakdown or premature depletion.

Guaranteed ways to charge your tablet

Even under conditions of proper use, it is not always possible to avoid damage to the connector, which wears out over time. Special devices allow you to charge your tablet if the charging socket is broken.

These methods do not require the use of a charger and are safe for the electronic device.

The first method is a “frog charger”

The method does not apply to monoblocks. If your tablet PC has a molded case and there is no access to the electronics, you will not be able to remove the battery for charging.

The principle of operation of the “frog charger” is to charge the battery directly.

The battery is powered through a special universal device, similar in design to a frog, which is why it received the name of the same name. This budget charger is widely available and is suitable for any portable gadget with removable lithium-ion batteries (Lithium Ion Battery or Li-ion Battery).

To charge the battery, it must be removed from the case, then placed in the “frog”. The contacts are connected to the corresponding terminals on the power supply (negative - to minus, positive - to plus). Then the battery is secured and the device is connected to the electrical network. The indicator will light up if the battery is installed correctly in the charger. Once filled, it is detached and returned back to the tablet.

This method does not require special knowledge and guarantees an increase in the charge of the portable device without charging.

The second way is to use a spare battery

To use the tablet without a power socket, additional batteries are also used: external PowerBanks with high capacity or spare internal batteries.

The portable battery is connected to the electronic gadget via a USB port, which is provided in all modern portable PCs or smartphones. Such devices differ in power, amount of available charge, and strength of outgoing current. With a current of 3A, the PowerBank provides faster charging, while the standard rate is 1A.

The diagram shows how many charges a power bank with a capacity of 10,000 mAh will last for different devices.

The capacity of an inexpensive PowerBank is enough for one charge; models with a larger charge capacity can be used several times. The external battery is filled from a computer, laptop or connected to an outlet.

A replacement battery can be purchased separately and used in place of the exhausted one. Before purchasing, you should check the size and capacity of the device installed in the tablet. It is not necessary to use a replacement battery from the same manufacturer. For any model of portable equipment (from inexpensive Lenovo to Samsung flagships), the Digma universal internal battery is suitable.

The third method is wireless charging

Some modern devices provide wireless charging, for example, the latest Samsung Galaxy smartphones. For older models that cannot be charged wirelessly by default, such devices are purchased separately and are expensive.

The Wireless Charger device connects to the power supply and automatically transmits a pulse to a special sensor on the smartphone's battery. If there is no such sensor on the battery, you can buy it and install it via a USB connector.

The mobile device is placed near a wireless power supply to receive electromagnetic pulses uninterruptedly. The rate of filling the battery in this way is significantly lower than with a standard charger connection.

Gadgets that support wireless charging have an advantage if the charging socket breaks down.

Some smartphones and tablets do not support this function; in this case, installing an additional receiver on the battery for wireless charging will not work.

Where to connect the terminals to charge the phone directly

Another option for charging directly will require some accuracy and knowledge of basic electrical engineering. To do this, you will need to cut off the connector on the charger with a knife and thoroughly clean the wires. A red wire is usually “+”, a blue (or other, for example black) wire is “-”.

After cleaning the insulation, the wires are applied directly to the battery contacts. The main thing is not to confuse the polarity and not to touch the metal with your hands. The wires are secured with pieces of insulating tape. After this, the charger is plugged into the outlet.

The method is also only a temporary solution. It provides unstable contact, which damages the battery, and is also unsafe in terms of the risk of electrical injury.

Whatever method you choose to charge the battery bypassing the damaged socket, you will almost certainly have to contact service. It is better not to delay such treatment, because all “amateur” manipulations only increase the likelihood of damage to the battery. But if lack of time or money does not allow you to repair your phone immediately, knowing these useful methods will be very useful.

It so happened that my phone’s connector was badly damaged... at first it just started malfunctioning; when charging, I had to move it a little and the contact would appear. But recently my son stepped on the phone with the charger turned on and the phone refused to charge at all! (I think this method is also suitable for those who, for example, have a faulty charger or no charger at all, but really need to charge the phone)

What we need: blue electrical tape, of course! and another phone with a charger.

I just had a Samsung dialer lying around, battered by life. Unfortunately, there was no blue electrical tape, I had to use white. But blue would be better, of course! We look at the polarity of the batteries and, in accordance with the polarity, we screw it in with the help of some mother, securing it with electrical tape. Ready!

How to proceed?

There are a few features of the charging socket that you need to know. The cause of micro-USB connector failure is frequent use or incorrect connection to the cable. Often, getting used to one device, a person automatically tries to connect the cable in the same way as before. But the port itself can be installed in different ways.

In the first case, the narrowing occurs towards the front of the smartphone, the second type involves a directly inverted connection.

Inserting the plug in the wrong position creates excess pressure on the attachment points and connections. This can lead to backlash appearing and contacts may be broken.

The cable plug has special protruding clips, which can be in the form of slightly protruding strips or hooks. This ensures a reliable and tight connection.

No additional effort is required when removing the charging cable. The latches can cling to the grooves and a sharp jerk can break the connector.

Since the phone is constantly with the owner, dust inevitably gets into the open parts. Grease and dirt adhering to the contacts impairs energy transfer and can complicate the charging process. Cleaning the nest will avoid this problem. You can use:

Toothpick. Gently move it around the perimeter of the connector.
A toothbrush. Run the bristles several times inside the nest.
By air. You can blow into micro-usb or use a special can of compressed air for this.
Alcohol. You can spray an alcohol-containing liquid, such as eau de toilette, into the port. The procedure allows you to dissolve accumulated dirt and dust.

You must act carefully and carefully in any case. No need to apply much force, make sudden movements or fill the port with solvent

If there is play in the place where the connector is installed, it can only be eliminated if it is possible to disassemble the device. In the case of a monoblock, it is better to contact a special service.

You can carry out the repair yourself. To do this you will need:

Soldering iron with a thin tip and related materials (tin, acid, rosin). New micro-usb connector

When purchasing, pay attention to the type of possible installation (A or B). The procedure is not complicated:

The procedure is not complicated:

The mounting location must be freed from the old connector or its remains.
Treat installation areas to clean contacting elements.
Set up a new port. All legs must be in the correct places. You cannot skip elements.

Solder

It is important to ensure that the tin between the different contacts does not touch. This leads to malfunction and failure of the device.

To obtain a guarantee of further operation of the device, you should contact a specialist. A professional has the necessary tools and skills.

Why won't my smartphone charge from the charger?

Before taking drastic measures and blaming the device itself for the malfunction, it is worth checking the following points:

Charger performance;
Compliance of the charger with the phone;
Serviceability of the charging cable and plug;
Status of the connector and contacts of the smartphone.

The serviceability of the sockets can be checked using a voltmeter or a special screwdriver, at the end of which a light bulb lights up if voltage is present. If it is not there, then check another outlet.

A problem with electrical wiring can affect the entire apartment. If this is confirmed, then everything is fine with the phone and the problem is not with it or the charger.

Why won't my iPhone charge?

I recently had problems with my iPhone 12. When connected to power, it did not always charge (when using the original cable and adapter). I tried a different cable and charger - same thing. And I decided to look inside the Lightning connector with a flashlight.

Even with the naked eye it was clear that the port was clogged with pocket lint, dust and other dirt. This debris accumulated over time, and I found myself pressing it against the back of the port every time I plugged in the charging cable. Eventually, a small "wall of dirt" began to prevent the charging cable from properly connecting to the pins inside the port. Hence the problems with charging.

An example of how much dirt can be in the iPhone charging socket

So before you spend a lot of time and money fixing iPhone charging problems, try cleaning the port of dirt and other foreign objects. But at the same time, be careful, because when cleaning you can easily make a mistake, due to which repairs may be needed in the future.

How to fix the charging socket on a phone or tablet?

There are two ways to solve the problem:

Take the device for repair.
Try to fix it yourself.

The first option is the most reliable. Only professionals can properly repair the charging socket. It would be even better to contact a specialized service center, where the technicians understand the features of your brand of devices.

Self-repair at home is strictly not recommended, since this is beyond the capabilities of a beginner. But so that you know approximately what replacing a socket is all about, a brief guide is given below. To work you will need:

Set of small screwdrivers.
Tweezers.
Knife (stationery or kitchen).
Soldering iron and its accessories.

The job of replacing the socket goes like this:

Unscrew the screws and remove the body by prying it off with a knife.
The soldering iron must be grounded, and then solder the negative wire. We bring the second end to the body of the soldering iron. This will protect the device from static electricity shock.
Next, you need to unsolder all the wires from the socket to prevent a short circuit.
We remove the retaining screws from the board, thereby opening access to the USB connector.
We take out the burnt socket and replace it with a new one.
Now you need to assemble the gadget in reverse order.
The final stage is to check the functionality of the phone and charging socket.

There is no guarantee that both the socket and the phone will be working properly after this method. Do not take risks if you are not confident in your abilities and if you value your gadget.

Can the charging socket be repaired?

Yes, this is quite possible, but it is better to entrust this work to a master. In service centers, after diagnosing and identifying the cause of the breakdown, you will be offered one of the repair methods:

Recovery. It will cost about 1,800 rubles, depending on the phone model and the complexity of the work.
Replacement. Replacing the socket with a new one will cost about 1000 rubles. excluding the cost of new parts.

If the gadget is under warranty, then it should be taken to the service center specified in the coupon, which must repair the smartphone during the entire warranty period.

Replacing a nest at home is difficult, but possible. All details are described in detail at the end of the article.

Direct battery charging, or “bypass” power supply

All modern batteries have inside not only battery packs, but also many other electronics responsible for the same functions. For example, a charge controller. Therefore, when connected to a power supply without a smartphone, such a battery will begin to fill with energy normally, and when it reaches 100% it will simply turn off. This method can only be used with lithium-ion batteries. You need to do the following:

On the laboratory power supply, set the rated voltage and current of your standard charger.
Connect the outer terminals of the battery in accordance with the markings to the “plus” and “minus” of the LBP.
Apply power to the device.
Watch the ammeter screen on the LBP: as soon as the current consumption begins to drop, turn off the power supply - the battery is charged.

You can connect your phone or tablet to power using approximately the same method, bypassing the battery:

Set the nominal current and voltage of the battery on the LBP.
Connect the contacts to the terminals inside the phone. You can now turn on the device and use it.

It is possible to charge the necessary gadget with a faulty connector. But all the above methods are only half measures, and you should resort to them only in the most extreme cases. Repair the charging connector as soon as possible and return to normal use of the device.

Problems with contacts

The contacts may become dirty or bent. If your phone is “floating”, then they may also become covered with plaque or rust. In this case, they need to be cleaned.

This is done as follows:

Remove the back cover of the phone and take out the battery.
Clean the contacts on the battery and in the phone itself using a cotton swab (it can be replaced with a toothpick or a match with cotton wool). Actions must be smooth and careful.
If you see that the battery's teeth are bent, then they need to be returned to their original position using either a toothpick or a match.
Use a cotton swab to also clean the Mini-USB connector. Often this is where dust, dirt and dried debris accumulate.

Lack of charge due to inattention

Inattention is one of the most common reasons for a dead phone. Everyone has several gadgets with the same connectors. Also, almost everyone among the different cables and chargers will have at least one, but with a different plug.

In a hurry or distracted by other things, we take the wire without looking, try to connect it to the phone, but nothing works. Or it works, but the charge does not go. Then the first thought that comes to mind is that the charger or smartphone is broken.

If the situation with a large number of cables is familiar to you, then do not rush to contact the service center. Just check if you have connected the charger to your phone. You also need to make sure that the cable is inserted into the connector all the way. After all, sometimes we just connect the charger, and it can move away. Therefore, always check that the cable is fully inserted. If it happened to you as stated above, then this is just an annoying oversight. But what to do if it really is a technical fault?

Charge your iPhone without using a charger

If you are the owner of an iPhone, then the hiking method described above will not be useful to you. Alternative sources have become available on the market that can convert environmental energy into electricity. You just won’t be able to use them without visiting a salon.

If you do not have experience in repairing cell phones, it is better not to undertake repairs on your own, since a careless movement can finally finish off your smartphone, which costs much more than the services of service centers. In addition, you can only aggravate the damage and repairs will cost more than the amount that could have been initially.

How to understand that a portable speaker is charged

A portable speaker, unlike a smartphone or tablet, does not have a screen that can show the percentage of charge remaining and the progress of replenishing the battery capacity. However, tracking the process is still possible.

To do this, one or more LED indicators are located on the speaker body. They display battery charge according to one of the following principles:

If there is one LED, its color changes when the charger is connected. When charging is complete, it turns off or changes color again. When discharged, such an LED may begin to blink.
If there are several LEDs in series, the indication works on the same principle as that used on smartphone screens. When the battery is fully charged, for example, three lights are on; when it is low, one light is on (sometimes blinking). During charging, all three lamps light up alternately. When the last one is highlighted, the battery capacity has reached its maximum value.

By following the instructions presented, you will be able to charge the portable speaker in several ways, as well as identify the reason for the lack of charge. Do not forget that such a device often has a PowerBank function and is able to share charge with a smartphone or tablet.

Vitaly Solodky

Darova!

They brought me this column. They said the charging connector came off.

Here's a column

Remove the decorative mesh.

We remove the muzzle.

Hidden inside is a small Chinese battery with a Chinese 1800 mAh.

Hehe... Why bother when you can push the LED into the connector...

This is how we implemented NFS in this column. It was simply covered with masking tape.

This place may contain your advertisement.

There should be a subwoofer speaker in this place, but this is just a decorative membrane.

The battery died in the trash.

Look how much free space there is in this case!!! About 15-17 batteries will fit here at a fair 2500 mAh. You can make a mature power bank with an honest 37000-40000 mAh. With such a capacity, the speaker will hum songs without stopping for several months.

Let's push the battery a little to 2.8 and test for capacity.

Here are the speaker parts.

Damage on the other side.

The sneaky, narrow-eyed little guys soldered the connector only to the pad under the connector and just a little bit along the edge...

We will make an eternal connector! Well, of course, if the plastic in the connector doesn’t break...

Let's remove the mask from the negative tracks. This is where we will solder the connector.

Solder a suitable connector.

Now we will strengthen the structure.

Let's strip some wiring, twist the veins so they don't unravel, and tin it.

Solder the wires under the connector.

Wrap it over the connector.

Let's solder it.

Let's wrap it again and solder it again.

Now with such a connector, you will not know grief.

Here's what happened

This is the full capacity of the battery, but in the operating range up to 3.5 V it turned out to be only 700...

We collect and check.

Everything works, everything rustles and now the song box can be recharged.

well, according to tradition...

I’ll write you an email for questions and consultations... [email protected]

I only take laptops from St. Petersburg, or you can give them to me through someone else. There’s a lot of fuss with them at the post office... Courier services won’t work either, because they deliver it when it’s convenient for them, not for me...

Let me remind you, dear pick-up people, that I do not work at the Service Center (SC). This is my hobby, repairing various electronic things...

Initially, a mobile phone was a simple device for making calls. Now it is a multifunctional device, without which a person will not be so comfortable. If used carelessly, the power socket sometimes breaks. In this case, you should know how to repair the phone's charging connector or charge it in another way.

Why won't my charger charge my phone?

If you are faced with the fact that the charger does not charge your mobile phone (the rule also applies to other gadgets), first of all you should understand the causes of the problem. There may be several of them:

The charging device has failed. Chargers often have cords that break off at the connector and at the point where the cord enters the inside of the case. Another similar device (you can rent it from friends) will help you check this assumption. If the charge is normal with another power supply, then the problem is not in the socket.
The battery has deteriorated due to prolonged use. Over time, batteries begin to charge slowly or lose their ability to hold a charge. To check, put another battery in the phone.
The USB socket has failed. Unfortunately, charging problems are also a common cause. If it is proven that the problem is not with the charger or the battery, we can only assume this option.

Only a service center can fully repair the nest. But there are several ways that will help charge the battery bypassing the socket. Of course, these are half measures, but you can hold out like this for a while.

We use the "frog"

Another option is to purchase a universal device. In everyday life it is called “crab” or “frog”. Even a device with a completely defective power connector can be charged with a “frog”, because the current flows directly to the battery terminals.

The frog is a plastic case equipped with a plug that is inserted into an outlet. It also has a place for mounting batteries and a pair of movable “legs”. Having inserted the battery into the socket, the tabs are connected to the terminals, observing polarity. A frog plugged into an outlet effectively charges your phone.

The method has several disadvantages:

You have to spend money on buying “crab”. At the same time, a high-quality device is expensive (more than you will have to pay for service).
Low degree of security, especially when using inexpensive devices. Cheap crafts from unknown “craftsmen” from China will not burden your pocket, but no one can guarantee the safety of the battery.
While charging is taking place, you will not be able to use the phone.

Do not leave the “crab” inserted into the outlet unattended. Periodically (every 20-30 minutes) check whether the battery is swollen, whether the case is overheated, and whether the charge indicators are on. These simple measures will help protect your home from fire.

A much safer charging option that bypasses the connector is to use a wireless charging station. But such technologies are supported only by the latest generation devices.

We recommend: Simple rules for caring for sewing machines

How to charge your phone directly?

There is another way to charge your gadget without having to connect a charger. This method is quite complicated and even dangerous, so we do not recommend using it, especially for beginners and those who do not understand technology and how electricity works. The essence of this method is as follows:

You need to cut off the tip of the charger and remove a couple of centimeters of insulation from the wire.
Then you need to strip the wires and determine the “plus” and “minus”.
Next, the battery is taken out and the corresponding terminals are located on it.
The wire cores are connected to the terminals, and polarity must be taken into account.
The charger is connected to the network.

It is also worth noting that this method has a bad effect on the battery itself, leading to depletion and breakdown.

How to charge your phone if the socket is broken

However, before blaming the smartphone's charging socket, you need to make sure that this particular part of the portable gadget has failed. After all, chargers, PowerBanks and external batteries become unusable no less often than parts of mobile phones.

Checking this is extremely simple: just change the charger. If the problem has been resolved, then most likely the problem is not with the smartphone socket. But in cases where the problem remains, you will have to use other methods.

Some methods of troubleshooting do not require special skills on the part of the user, while others can only be carried out with special tools. Therefore, it would be more appropriate to consider each method separately from the other method.

The tips discussed in this article can be applied not only to smartphones, but also to tablets and music players with a similar device design.

Video instructions for charging a mobile phone with a broken battery socket

Find the position where charging will start

An intuitive method that all users use when there is a problem with the socket. Its essence is to find the angle at which the charging of the wire and the USB port coincide. Then the user can only somehow secure this position of the mobile phone.

How to charge your phone with a frog

There are special devices that directly charge the battery of a mobile phone - a frog. The essence of this device is simple:

You need to put “antennae” of the device on the battery contacts (according to the value).
The frog is then connected to the network.

However, this method is only suitable for smartphones with a removable battery. Since it is simply impossible to get a battery in monoblock devices.

Fast recharging by shock or heat

These methods were transferred to phone batteries from ordinary AA batteries. The point of the trick is to accurately hit the device's battery. The method will give the user a few more minutes of smartphone operation, then the device will be discharged to 100%.

A similar effect can be achieved by heating the device body next to the battery. This is best done with the help of some kind of metal intermediary. Iron cutlery works great.

Of course, the main thing in this method is not to overdo it. Otherwise, instead of charging, the user will get a damaged phone.

Direct battery charging

If the user does not have a charger nearby for his smartphone model, but has an old adapter, then it can also be adapted to charge the device. To do this you need:

Strip the wire of the old adapter.
Find his plus and minus.
Connect to the battery: plus to plus, and minus to minus.
Secure the structure with adhesive tape or tape.

If everything is done correctly, charging will start instantly. However, extreme caution must be taken as the charger wires are no longer protected and may cause electric shock.

Making a battery charger for camping

The most difficult thing to deal with is the problem of a smartphone battery being discharged while traveling, when there are no sources of electricity within a radius of several kilometers. Despite the severity of the conditions, experienced travelers have long ago solved this problem.

You should always take several chargers with you when going camping. So that if one of them breaks, the user has a replacement option.

First of all, you need to take the preparation of the trip as seriously as possible. Consider all options for charging portable gadgets. At the same time, you should not take too many devices with you; it is better to stick to the only necessary devices.

There are two types of travel chargers:

solar panels;
portable batteries powered by batteries.

These devices will be power supply types, that is, they will replace the main charger unit. The user only needs to connect the charging cable from one selected device to the smartphone and the charger will be ready for the hike.

Video instructions on how to make a charger for a phone battery while traveling

Connector repair methods

The listed methods for increasing battery charge are temporary measures and cannot be used permanently. Failure of the power slot negatively affects the condition of adjacent connectors and will soon lead to their failure.

Resoldering

To dismantle the screen. it needs to be carefully picked up from the edge.

Self-repair of the device is complicated by the fact that you need to completely disassemble its case. This will require special equipment: small screwdrivers, tweezers, a thin knife (a stationery knife is used) and a soldering device

The most difficult part is to remove the screen and touchscreen to access the internal components of the tablet. You need to pry it off slowly from all sides, otherwise the glass may crack.

After opening the tablet, the board is removed from it. To do this, all cables and wires are unsoldered from it, and the fixing screws are unscrewed. Afterwards, the old connector is removed, the attachment point is cleaned and a new power slot is placed there. The contacts are soldered in place of the previous ones. Then all the parts are inserted back one by one, and the device is turned on for testing.

Unbend the "antennae"

If the socket has become loose from frequent use and does not hold the charger in place, you can lift the locking latches on the plug. This method will not give a long-term effect, but is suitable for quickly charging the tablet.

An example of a broken and normal charging socket.

You will need a needle or small forceps to straighten the antennae. By default, they are hidden and extend when the charger is placed in the power connector, but over time they often stop locking. By lifting them, you can improve the contact of the charger with your tablet PC or smartphone.

Clean the charging socket

Sometimes the cause of the problem is dust accumulation inside the power connector.

It is important to clean it with the device turned off and the battery removed, so as not to short-circuit the contacts

A toothpick or a thin wooden stick will help remove dust from the connector; the main thing is not to overdo it and not damage small parts in the slot

To clean, just place it shallowly in the slot and carefully collect the dirt inside in a circular motion.

Give it to the service center

The fastest way to determine the cause of the problem and fix it is to help specialists. The service center will conduct a full diagnosis of the gadget, and then replace the broken parts.

The price of such repairs varies: sometimes it is possible to restore the tablet's operation only by replacing several components. If the cause of the breakdown is a failure of the power socket, and the remaining parts are in order, then the repair will be inexpensive.

What to do if your iPhone won't charge

How to disassemble iPhone 5 and 5s at home

It also happens that the phone simply refuses to charge even with the original charger or through connection to a third-party battery or personal computer. There could be a lot of reasons for this. The main ones:

Broken socket. You should check the outlet with other electrical appliances or move the phone to another room for charging.
Failure of the power supply or cable. Even original and high-quality Apple accessories can be broken and no one is immune from this. You should try to recharge the gadget in other ways to prevent internal damage.
Problems with the power connector on the phone. If dust, dirt or water got into it, this could cause poor contact and the inability to receive electricity.
The controller has burned out or failed. Power management and charging are controlled by a special chip, which could be damaged mechanically or by moisture getting into the device’s body. In the latter case, corrosion processes could occur that prevent electric current from passing freely through the board to the battery.

Important! There can be a huge number of reasons for the malfunction. To solve the problem, it is recommended to contact iPhone repair service centers.

If the phone does not charge, then there are obvious problems

How to replace the charging socket on your phone

The only proven way to get rid of the problem is to leave the matter in the hands of professional workers. You may not want to try any “workarounds” after they tell you how much it costs to fix your phone charging socket. In modern devices, this connector also performs the function of connecting to a computer and transferring data, so its failure greatly reduces the functionality of the device. This is a microcircuit that cannot be repaired at home on your own. Phone repairs often cost a lot of money and you should be prepared for this.

In this case, it is best to contact a certified center. The ideal option would be a branded service point from the same manufacturer as your mobile phone. They know all the intricacies of their products and will be able to provide qualified assistance to fix the breakdown. Inexperienced or careless workers can aggravate the situation and lead to even greater damage to the device.

Replacing the connector

Now let's figure out what to do if the charging socket is broken, and whether it can be repaired at home.

After disassembling the gadget, you need to carefully inspect the socket and determine the type of damage. There are three types of faults:

the contacts connecting the power connector to the device board have become unsoldered;

obvious damage is visible on the nest;

The socket is damaged, but its replacement is only possible together with other parts of the gadget. For example, the board on which the socket is installed is very thin and cannot withstand heat. In addition, among new phones from Apple, Samsung, and Lenovo, there are often models in which the power connector is rigidly connected to the cable.

Replacement of the connector at home should be carried out in the following order:

remove the back cover of the gadget;

inspect the nest;

remove the fee;

unsolder the connector, the easiest way to do this is with a soldering gun. Set the hot air temperature to 380°C, then blow and try to loosen the connector. When it moves, you can remove it from the board;

install a new connector and solder it.

The following video shows how to replace the power connector using six different devices as an example.

How to replace the charging socket on your phone

Find out how to charge your phone without charging it.

Using third party chargers

How to reflash Android - reinstalling at home

There is an opinion that third-party chargers can harm equipment, damage it, and even cause the battery to catch fire. In most cases, this is a myth, since modern power supplies and USB cables have good reliability and durability characteristics, regardless of the manufacturer and purpose.

Naturally, you should avoid chargers that are frankly cheap and of poor quality, even in appearance. They are usually passed off as originals from companies such as Apple or Samsung. Unfortunately, these manufacturers do not make budget chargers and do not sell them anywhere.

It is recommended to always purchase only original chargers from official or confirmed stores and service centers. Otherwise, this can really cause malfunctions that sometimes even the most experienced technicians will not be able to fix. If only the power supply is broken, then you can charge your device with the remaining cord from it through a personal computer or laptop.

Non-original charging can further damage your phone.