How to change the password on a Huawei router from the WEB interface and Wi-Fi network

In this article I will tell you where to look up the Wi-Fi password on the Huawei EchoLife HG8245HV5 modem.
Note. On the sticker on the back of the modem there are 2 fields SSID and WLAN Key . SSID is the name of the Wi-Fi wireless network, and WLAN Key is the password to connect to it. You can use this data to connect to a Wi-Fi network.

WLAN indicator on the modem is not lit , then you need to press the WLAN and hold for 5 seconds so that the WLAN lights up.

Also, the data for the Wi-Fi wireless network can be changed manually in the modem settings; in this case, use the instructions below.

So, you need to do the following:

1. Establish a connection to the modem.

   To connect via a wired connection, use a network cable connecting port 1 on the modem and the port on the network card of your computer.

   To connect via a wireless connection, you must be connected to your modem's Wi-Fi network.

2. Go to the modem settings.
3. Open any browser. In the address bar, go to the IP address 192.168.100.1.

An authorization window will open. Enter the login root , password admin and click on the Login .

Changing your Wi-Fi password is required for various reasons: you forgot it, reinstalled Windows, reset your router settings. And I just want to protect my network from unnecessary connections. After all, this reduces Internet speed and increases traffic consumption. You don’t always have the time or desire to take a router to the provider’s office, and doing it yourself can be difficult. The problem will be solved by the step-by-step instructions presented below, which will tell you in detail and show how to change the WiFi password from ByFly on modems from different manufacturers. For correct settings, it is recommended to use the Internet Explorer browser.

How to “password” Wi-Fi on the Promsvyaz m200a router

You must proceed as follows:

1. Open Internet Explorer.
2. In the address bar (not in the search bar!) type 192.168.1.1 (Fig. 1), press Enter.
3. In the pop-up window, fill in the username and password fields: admin/admin, if this did not happen automatically. Sign in.
4. In the router menu, click on the Interface Setup tab, then go to the Wireless page.
5. Enter a new WPA key and rename the network if desired

After you have succeeded in changing the password on the Promsvyaz modem, click the SAVE button to save the settings.

_imgslider srcs=”https://market-mobi.ru/wp-content/uploads/s76dyfchy7hy7fc-2-1345×800.jpg,https://market-mobi.ru/wp-content/uploads/dg67cggcdf.jpg” ]

Change using the example of TP-Link

Changing the password is also described in the following video:

The procedure for changing the network access code is as follows:

1. You need to open any web browser and enter the IP address of the router in the address bar. This will open its admin panel, where you can change various parameters, including the network key.
2. Then a window will open asking you to enter authorization data (router username and password). By default their values ​​are admin. It remains to confirm the input to complete the transition to the router admin area.
3. Click on the “Wireless Mode” section in the menu on the left side and go to “Wireless Protection” from the drop-down list.
4. Here all that remains is to find the field with the entered valid password and change the current value to a new one.

1. Confirm the action by clicking the “Save” button and select “System tools” in the main menu.
2. In the new list, all you have to do is click “Reboot”, confirm the operation and wait a while until the router reboots.

Now you need to enter a new access code to connect to the wireless network.

The main thing is that all devices that were using this network at the same moment will lose access to the Internet.

Instructions on how to change the password on a Wi-Fi router

Below are ways to change the password on the most famous routers.

• How to Set up a USB Modem or Huawei Mobile WiFi Router and Connect 3G-4G (LTE) Internet?

TP-Link

The action plan is as follows. Having connected to the router via cable or via radio waves, launch any Internet browser. In its top line, enter 192.168 1.1 (the address that allows you to log into the router and change the password). Sometimes the login address may be 192.168 0.1. And in the windows for login and password - either the word “admin” (set by default by the manufacturer), or those that you previously came up with yourself.

Note : If this does not help, reset the settings to the initial ones.

Next, we password-protect access to the network again. We proceed like this:

• select the wireless connection tab (wireless);
• put a checkmark next to the boxes entitled WPA/WPA2;
• in the first two we select automatic mode, in the third we enter a unique set of characters.

How to change the password on a TP-Link router without anyone guessing it? It is recommended to use a minimum of eight characters, using capital letters, small letters and numbers. Naturally, we save the changes. It’s a good idea to write down the access code so you don’t have to rack your brains remembering it. The mobile application Evernote can handle this task perfectly.

Figure 3. TP-Link router management menu interface

Huawei

The procedure is very similar. The connection is made as described above. The IP address and factory login/password are indicated by a sticker on the device body. Next, in the Basic menu, look for the option to select a wireless (wireless lan or WLAN) connection. Then:

1. in the SSID box we indicate the name of our network (we can come up with any name);
2. select an encryption certificate (authentication) – for example, WPA2-PSK;
3. indicate the password opposite the Pre-Shared Key inscription.

Let's save. In general, anyone can figure out how to change the password on a Huawei router.

Figure 4. Huawei router management menu interface

Beeline

It’s no less easy to figure out how to change the password on a Beeline Wi-Fi router. Moreover, the menu is in Russian. We indicate in the browser the same address as in the previous options. The router management menu appears. Following the prompts, we get to the advanced settings. In the “Wi-Fi” section, select “Security”. Having chosen the authentication type and other nuances, we get to the password window, where we print a unique “password”. Save the changes.

Figure 5. Beeline router management menu interface

• Wi-Fi calls from different operators: what are the benefits and how to use them?

D-Link

The beginning of the procedure is standard: we establish contact with the access distributor via the browser, enter twice, follow the menu prompts: Wi-Fi, then “Security Settings”, where we enter the PSK security key in the appropriate window. Before you change the password on your D-Link router, it is better to write it down on paper.

Figure 6. D-link router management menu interface

MTS

How to change the password on an MTS router is not difficult to guess, knowing how this is done on devices we are already familiar with. By the way, this company uses devices manufactured by Huawei. Access to their interface is already familiar to us: we enter the address indicated on the case in the browser line, enter a standard word. Go to settings and click on WLAN. Next, enter the new network name in the SSID line, and the key in the box of the same name.

Other models

Considering that the admin panels on routers from different manufacturers differ, below we will consider ways to change the Wi-Fi password for any provider, including Kazakhtelecom.

D-Link

Instructions can be viewed in video format:

To log into the web interface, use the address 192.168.0.1. Login – admin, password is the same or missing. In older models with an English-language interface, you need to go to the Setup – Wireless Settings sections. Then at the bottom of the page you need to find the Pre-Shared Key line, in which you can change the required parameter. Then all you have to do is click Save/Apply.

In the modern admin panel, go to advanced settings, find Wi-Fi and open “Security Settings”. The password is entered in the “PSK encryption key” field.

ASUS

To log into the admin area, use 192.168.1.1. Login and password – admin. In the English-language panel, open “Settings”, go to the “Wireless” sub-item and select “General”. The password line is called “WPA Pre-Shared Key”. To save the changes, click Apply.

In the black panel in Russian, go to the “Wireless Network” section on the left, “General” tab. The code is changed in the “WPA Pre-Shared Key” line.

Zyxel

To go to the Zyxel settings, the address 192.168.1.1 is also used. Authorization data – admin. The password is changed in the “Wi-Fi Network” category, in the “Security” subsection. The line for changing the code is “Network key”, saving is done by pressing the “Apply” button.

The Keenetic line of devices from this manufacturer works with different firmware. Here, to change the network key, you need to go to the bottom menu to the “Wi-Fi” page and then click “Access Point”. The password line is called “Access Key” here.

TredNet

The web address is no different - 192.168.1.1, the login and password are also admin. The password change option is located under the Wireless path in the Security submenu. The code word should be entered into the input form opposite Passphrase and written again in “Confirmed Passphrase”. All you have to do is click Apply to save the changes.

NetGear

These routers have a standard address of 192.168.1.1. To log in, the username is admin and the password is password. To set a new code, you should open “Basic mode”, then “Wi-Fi network”. The required option is located in the security settings section in the “Passphrase” field. Confirmation is performed by clicking “Apply”.

You can see that the principle of changing the security code for your network is not particularly complicated. The only thing that needs to be taken into account is that the interfaces of the routers differ from each other, as well as the data for entering the settings.

Sources used:

• https://www.nur.kz/1767476-kak-izmenit-parol-vaj-faj-kazahtelekom.html
• https://huaweigid.ru/blog/drugoe/nastrojka-routera.html
• https://wifigid.ru/nastrojki-routera-dlya-provajdera/kak-pomenyat-parol-na-wi-fi-kazahtelekom

How to change or set a password

You can change the password or set it for the first time through the router setup interface. To do this, you need to connect a computer or other device to the router. This can be done in two ways - via a cable or using a wireless connection. After that, go to any browser on the device, where they register the address specified on the router. Manufacturers place a sticker with the IP address, login and password to access the router settings on the back of the router. You must enter the address strictly in the form specified by the manufacturer; do not change periods to commas, etc. If the text on the router sticker is worn out and cannot be read, try entering the following numbers: 192.168.1.1 or 192.168.0.1. It may be that a different IP address is set for your model, this happens rarely, but if the suggested numbers do not redirect to the desired page, and it is not possible to clarify the address on the sticker, you need to look for the instructions for the device.

You can also configure the router via your phone; to do this, you need to connect to the router, open a mobile browser, all other actions are carried out in the same way as from a computer.

After completing these steps, you will find yourself on the authorization page, you will be asked for a login and password, by default for standard routers these are admin and admin. If you receive an error when entering this data, carefully study the sticker on the router, all the necessary information for logging in is indicated there.

Router Password Kracker utility

The beauty of this software product is that it does not require a saved file with the router configuration, which can only be obtained by knowing the password for the device. All you need is a connection to a router (Wi-Fi or wired – it doesn’t matter) and that’s it. Just enter the router's IP and login in the required fields in the program window and click on the Start Crack button.

However, this utility also has a disadvantage: it uses a brute force method, so searching for a password can take a long time. But if you cannot recover the data you have forgotten in any other way, you will have to be patient.

Changing Wi-Fi Network Security Settings on ZXV10 H208L

This modem is configured using the same system:

• enter the numbers 192.168.1.1 in the browser address bar;
• Next, fill in the name and password fields: admin (for both);
• in the modem menu that opens, press the WLAN button on the left side;
• then go to the Security tab;
• The security key is changed in the WPA Passphrase line.

The process is completed by clicking the Submit button

If for some reason you cannot connect the device after setting up the modem, this may be the problem. For example, the program crashed or other problems occurred. Here, the solution to the problem will be the repair of laptops, computers and other gadgets.

How to change the password on a ZTE router

The following procedure is suitable for router models ZXHN H208N and ZXV10 H208L, as well as for the MT-PON-AT-4 device from Promsvyaz:

1. We go to the address 192.168.1.1 through the browser.
   We type the simple word admin in the empty fields and click on “Enter” or Login to enter the account interface. Log in to your account using the word admin
2. In the left menu area, click on WLAN to expand the contents of the section. Let's move on to the third Security block.
3. In the central part of the window, change the security key in the WPA Passphrase line.
   To save and apply changes, click on the bottom Submit button. Change the key in the WPA Passphrase field

Video: understanding the personal account interface of the ZTE ZXHN H108N router

Huawei HG8245A/HG8245H-256M routers: WiFi protection

Standard setup scheme:

1. In the browser address bar, enter 192.168.100.1 and press Enter.
2. Fill in the login and password fields (Fig. 6). Depending on the router model, these are:
   Account – telecomadmin and Password – admintelecom (HG8245A modem);
3. Account – root and Password – admin (HG8245H-256M modem);
4. Click on the WLAN tab.
5. Check the Enable WLAN checkbox.
6. Set a new security key in the WPA PreSharedKey field.

If desired, you can rename the wireless network in the SSID Name line. Changes are saved by clicking the Apply button

How to reset your modem to factory settings

The decision to reset the modem settings to factory settings appears among users of this equipment for some reasons. One of which is the most commonplace, is the deterioration or complete stop of the Internet, due to problems in the settings of the modem or router. Also, if the router is configured incorrectly, it would be easier to reset the settings to factory settings rather than change them and get confused again.

Another reason is the inability to get into the administrator panel of the device to change the settings, due to the provider changing the IP address to access the global network, or you simply forgot the login and password to enter the modem settings. As it turns out, there can be many reasons, so let's learn how to reset the configuration of this equipment.

How to reset your modem to factory settings.

Well, as you know, all manufacturers of Internet equipment build special buttons into their devices to completely reset settings. As a rule, this button is located on the back side of the router; next to it there is usually the inscription reset (reboot), which must be pressed for 20-30 seconds until the device reboots. Afterwards the settings will be reset.

Also, this button may be located inside the device, and you can only reach it with a needle. The principle here is the same, we press the button with a needle and wait until the modem reboots.

You can clearly see the reset to factory settings by looking at the lights on the modem; they should go out completely and turn on again. This means that the pressed button can be released because the settings have already been reset. Or try to log into the Internet, if it doesn’t log in, then it becomes clear that the modem settings have definitely been reset to factory settings.

Resetting the modem via the device's admin panel.

A situation may arise when the reset button simply does not work or is broken. Then you need to log into the admin panel of our device and reset the modem settings from there. To do this, open any available browser and in the command line enter the standard ip 192.168.0.1 or 192.168.1.1 . On the back of the modem it is usually written which address to enter to enter the admin panel. Despite the fact that the url address for login (https://tplinkwifi.net) may be written on the label, login will also be carried out using the IP address.

So, we went to the address, now we need to enter the username and password, which can also be seen on the modem label, usually “admin”, then press the “login” .

On the modem settings page that opens, go to the system tools -> factory settings, where we click the restore .

Why put a password on WiFi at all?

I think we should start with the fact that 90% of users do not have any important information on the local network and are not even stored on the computer itself. Accordingly, from an information security perspective, such a network is not of particular interest to an attacker. So why shouldn’t you make it open?! At a minimum, because anyone can connect to it and borrow part of your Internet channel from you. In the case of an ADSL line, this can be a critical factor, since some people still have an access channel of no more than 1 megabit. But even if you have FTTB or GPON or GEPON optics and giving away even ten megabits will not cause problems, you should not open access to it to everyone. Anyone who connects will access the global Internet under your IP address. And, if he commits illegal actions, they will first come to you with questions. Do you need it? Therefore, it is still better to protect yourself from unnecessary problems.

Which security certificate should I use? WEP, WPA-PSK or WPA2-PSK?

Definitely WPA2-PSK. This is currently the most advanced specification that provides maximum security for a wireless WiFi network. WPA-PSK should only be used if the connected devices do not support WPA2-PSK. And then, if possible, it is better to use the WPA/WPA2-mixed mode.

Changing the password

To change the Wi-Fi password on a Huawei device, you need to complete 2 steps:

1. Login to the settings page.
2. Making adjustments.

Go to the settings interface

The first thing you need to do to change the password on a Huawei Wi-Fi router for any provider (Rostelecom, Kazakhtelecom and others) is to open any browser on your computer and enter one of the following options in the address bar:

• 192.168.1.1,
• 198.168.0.1,
• 192.168.100.1.

A window for entering your login and password will appear on the screen. There are many standard combinations. The table below shows the most popular ones.

As a rule, such data is indicated on the back cover of the router.

If the entered combination does not match, it means the password has been changed. In this case, you need to reset to factory settings, then the data indicated on the case will become relevant again.

It is important to understand that along with the password, your Internet connection will also be reset. The device will need to be configured again.

Instructions on how to reset settings to factory settings:

• Plug the router into a power outlet,
• Press the “Reset” button for 15 seconds. If the button is pressed into the body, use a paperclip or pen to press it,
• Wait until the router reboots.

After this, everyone is recommended to change the password for the WEB interface of the Huawei router:

1. We look for the “System Tools” menu, go to “Modify Login Password”.
2. In the “New Password” line we enter a new access code to the settings.
3. In the “Confirm Password” field we confirm the new data.

After changing the authorization data, do not forget to save it with the “Apply” button.

We make adjustments

For visual instructions, see the following video:

Once the correct password and login have been entered, the user is taken to the settings web page. For all Huawei routers it is almost the same, regardless of which provider provided you with the equipment: ByFly, Rostelecom or Kazakhtelecom.

The general instructions for changing the Wi-Fi password on Huawei routers look like this:

1. In the top line, select the “WLAN” tab.
2. On the left, select the “SSID Name” item and enter the name of your connection here. For example, “ByFly” or “Rostelecom” (any word is possible, it doesn’t matter).
3. Next, check that the “WPA2 Personal...” certificate is entered in the “Authentication Mode” line. It gives maximum protection to the connection. You can also select “WPA-PSK” if the first one is not in the search list. If everything was done correctly, “AES” (this type of encryption) should be displayed in the line below.
4. In the line “WPA2 Pre Shared Key” you can change the Wi-Fi password on Huawei routers. Enter the security code you came up with. It must consist of at least 8 characters.
5. Click on the “Apply” button.

1. Select the “System Tools” tab at the top.
2. In the menu on the left, make the “Configuration File” item active and click the “Save Configuration” button. In the window that appears, confirm your actions with the “OK” button.

After all the steps, you need to reboot the router. This can be done in the “Reboot” section.

Huawei hg8245h login and password Kazakhtelecom

3482 users found this page useful.
Nowadays, almost every Internet user at home has a modem or wi-fi router, thanks to which the Internet works.

It’s not uncommon to change some modem parameters, for example, the Wi-Fi password or the Internet settings themselves.

When entering the settings, the modem requests authorization data in the form of a login and password. On Huawei modems, the standard admin/admin are not suitable, and in this article you will learn all the login and password options for entering the settings of Huawei modems using the Huawei hg8245h as an example.

How to enter the settings of Huawei hg8245h?

First, connect to the modem via wire or Wi-Fi and type 192.168.100.1 in the address bar of any browser and press Enter.

Entering the modem's IP address into the browser's address bar

A window should appear asking for your login and password.

Window for entering login and password

For Huawei hg8245h the following login/password combinations are possible:

• login (Account) – root , password (Password) – admin
• login – telecomadmin and password – admintelecom

If none of the above combinations work, it means someone changed them, in which case you will have to reset the modem to default settings using the reset button on the side panel.

Reset button to reset Huawei hg8245h

In this case, the Internet and Wi-Fi settings will be lost and after entering the settings you will have to set them again.

Also, sometimes when you enter the address 192.168.100.1 in the address bar of the browser, a window asking for login and password does not appear. In this case, you need to read the article on determining the IP address of the router or enter the following settings in the properties of the network connection.

Specifying the IP address in the network settings to log in to Huawei hg8245h

If you have several computers at home and only one Ethernet cable, then it is recommended to purchase a wireless router. A good device of this type is the Huawei HG8245H router.

Router settings, as we know, are made through the control panel (web interface). But what is the password and IP address for the HG8245? After all, this data is necessary to access the admin panel. Below we will learn what to enter when logging in, how to install and configure this network switch according to the instructions.

Connect” and configure

Let's now learn about how to set up a Huawei router. First, take the device out of the box and connect it to the mains. After connection, the green indicator light next to the PWR mark on the device should light up.

Now take an external Internet cord or telephone cable and insert it into one of the two connectors for the MGTS GPON network. The connectors are painted black and are located on the back of the device. Once connected, another green light on the router should light up next to the POS or LOS mark.

Once connected, you should activate the device. You can do this in two ways:

• Via Ethernet cable. To do this, you need to connect the router to the provider’s cable, and insert the patch cord into 1 of 4 connectors (the required sockets are colored yellow). Insert the other end into the Internet card slot on the computer.

• Via Wi-Fi. Using the Wi-Fi adapter on your computer, find your router and connect to it.

Now you need to go to the settings menu. Open any Internet browser, enter the address of your device into the search bar and press Enter.

Please note that HG8245H routers have an IP address of 192.168.100.1.

Also note that on some HG8245 routers, depending on the firmware version, a different factory Login/Password is installed by default:

LoginPassword

Working with a modem

After entering the data, the configuration panel will open. Let's now look at the basic settings of the Huawei HG8245H.

Internet activation (for Rostelecom)

1. Open the “LAN” tab and select “Lan Port Work Model”. Make sure all ports have checkboxes. If there are no checkboxes, check them and click the “Apply” button.

Changing the password on a Huawei router

On almost all Huawei routers, the procedure for changing the password is almost the same (the design of the page and the location of the items may change depending on the firmware used).

To change the password on a Huawei router, follow these steps:

1. In the user interface, in the menu located on the left side, open the “Basic” item and the “WLAN” sub-item.
2. In the “WLAN” settings menu that opens, enter your preferred Wi-Fi network name (SSID field).
3. In the “WPA pre-shared key” field, enter your preferred password of at least eight characters (use only the English alphabet and numbers).
4. To save your changes, click the “Submit” button.

Today, the Chinese company Huawei is quite famous, and, literally speaking, has captured the market of telecommunications devices. Everyone knows it due to the incredible popularity of its phones, but few know that it also produces wonderful and high-tech routers. However, like devices from any other company, routers from Huawei require both correct connection and more complex settings that are difficult to deal with without general information about it. In Russia, a Huawei router can be obtained from many providers by becoming their subscriber.

The entire set consists of the router itself, a power supply and a patch cord, that is, there are no differences from analogues, everything is the same. The only features that can be noted are the presence of two antennas, 32 MB of RAM memory and five Ethernet ports. Quite simple and aesthetically pleasing. However, even taking into account its apparent simplicity, not every user will be able to understand how to configure a Huawei modem.

What password should I set for WiFi?

Let's first take a look at your wireless network. On a typical home wireless network, no important or sensitive information is circulating. You or your relatives, loved ones, friends will connect to it. Laptops and smartphones will be used. It is possible that a Smart TV with a WiFi module or a media player will be used. From a security point of view, a code of 8 characters will be sufficient. Judge for yourself - the time it takes to crack such a password using brute force methods is on average 11 months. Believe me, no one will break your home WiFi network for such a long time - no one needs this. Now about the symbols themselves - these can be letters, numbers and symbols. I would advise you to exclude the symbols. Now, of course, the security specialists will pour out all their accumulated anger on me and will fight in hysterics against the monitor screen, but... even if they significantly reduce the reliability of the passphrase, it will still be more than enough for a simple home WiFi network. But connecting from a smartphone with a key: 7?”rT&#Qt%#$ is a real pain. And most importantly, it is unnecessary and stupid within a simple home network. The passphrase must be made of a mixture of Latin letters and Arabic numerals. In this case, letters can be made in different cases. I strongly recommend that this is not a word, but a random set of characters. The word is not desirable because it is easier to find it in the dictionary.

What a key shouldn't be.

- do not use names - your own, other people's, dog's, cat's - any. - don't use dates. - do not use simple words. - do not use simple character sets. Example: 12345678, 87654321, qwertyui, qwer1234, qwaszxasqw, abcd1234 - do not use repeated characters. For example: 11111111,11223344, aabbcc11. - do not use template passwords. Example: password, passw0rd, football, master, iloveyou, superman, etc.

How to make a password from random characters?

1 way. Find an online generator on the Internet, set the length there as input conditions - 8 characters and the use of Arabic numbers, uppercase and capital letters. As a result, you will receive generated key phrases. Method 2. We take a line of 8-9 words from any book. We write out every second or third letter of each word and translate it into the Latin alphabet. If some characters are repeated, replace them with any numbers. Afterwards, we randomly make some letters in capitals. Ready. The complexity of such a password is quite enough for a regular home wireless WiFi network. 3 way. We come up with a sentence of 3-4 words. Remove spaces. We delete characters in random order until 8 characters remain. We randomly change some of the numbers into letters, and capitalize 2 or 3 of the remaining letters.

Nuances of code generation

Finding out how to change the password on a WiFi router is not all. To create a secure wireless network, it is important to generate a strong password. According to experts, it takes at least 11 months to crack an 8-character code. Who wants to rack their brains for that long? There are unlikely to be anyone willing to do so.

Strong passwords typically consist of numbers, letters, and symbols. But since we are talking about a home network, you should not use too ornate combinations and it will be easier to limit yourself to only letters and numbers. It is advisable that they be typed in random order.

First connection and related configurations

Huawei WS319

After connecting, you can start setting up your Huawei router, which looks pretty standard, about the same as everyone else’s. First you should open any browser.

Then you need to enter the router address “192.168.3.1” into the search bar. An authorization window will open, where you need to enter “admin” in the login and password fields.

So, now you need to understand how to configure the Huawei WS319 router in the correct way. First, let's make the most popular PPPoE setup, which is used by major providers such as Rostelecom. To do this we need to do the following:

1. Enable connection
2. You must select Ethernet as the service type
3. For the connection type we denote the IP router mode (PPP)
4. Activate always-online mode
5. Enter the login and password from the contract
6. Save all changes

Various user configurations, for example the name of the network, can be chosen at your discretion or left as it was, this does not play any role.

Configuring the Huawei WS319 router in dynamic IP mode does not have significant changes, so it is worth noting only a few main differences: the connection type is not (PPP), but (IP); for IPv4 addressing you need to select DCHP; In the NAT item, enter the NAPT value.

To be able to use the Huawei Wi-Fi network on your phone without any problems, you need to go to the home network tab and select the Wi-Fi settings item there. In the SSID line, enter any name at your discretion, this is what your network will be called after all the actions. Next, be sure to activate the network by checking the box next to the corresponding function. Regarding security modes, you can choose whatever you want, depending on the location of the router. It is better to choose a longer password, with capital and small letters, and be sure to add a few numbers. This is all that is needed, after these steps the Wi-Fi should start. If you have any problems, use the screenshot:

To do a reset, you need to go to the “reset settings” section, which is located on the main page.

Huawei HG532E

The setup of Huawei HG532E is almost identical to other Huawei models. However, the web interface address is slightly different, namely “192.168.1.1”. After authorization, you need to go to the WAN through the Basic tab, there, after selecting the INERNET_B_ATM_0_33 network, you can begin to enter and designate the required configurations. To begin with, we will also consider PPPoE, so we select this type of connection, and then enter the login and password from the documents. Everything else on this router should be correct by default and correspond to the screenshot:

To configure the Huawei HG532 router in static IP mode, you can use the instructions for the previous model. The same applies to wi-fi, in order for it to work on the phone, you need to repeat the same steps as for the previous model.

Huawei Smartax MT880

We log in to the web interface in the same way, and in the window that opens, select WAN in basic.

Editing configurations in this model is quite different, so it may not be immediately clear. To start entering values, you need to click on the pencil shown in the screenshot. The settings themselves below should also match, they are about the same as before:

After this we confirm the changes.

Opening the Huawei router user interface

Login to the user interface is carried out through any Internet browser, such as Google Chrome. To open the router settings page, do the following:

1. In the address field, enter the router's IP address: 192.168.1.1 or 198.168.0.1
2. In the access window that appears, enter the login and password (one word for both lines) “admin”. If something else is chosen as the login and password (this happens if the Huawei router was received from the provider company), information about this should be on the label on the bottom of the router.
3. If the user interface does not open when you enter the correct username and password, reset to factory settings and try again. Remember that after a factory reset, along with resetting the password, the default Internet connection settings will be lost. In this case, you will have to configure the router yourself or call a specialist for this.

If the user interface is displayed on the screen, proceed to the next step.