If you are faced with For Honor slows down, crashes, For Honor won’t start, For Honor won’t install, controls don’t work in For Honor, there is no sound, errors pop up, saves don’t work in For Honor – we offer you the most common ways to solve the problem problems.
First, check whether your PC's specifications meet the minimum system requirements:
- OS: Windows 7 / 8.1 / 10 (64-bit)
- Processor: Intel Core i3-550 / AMD Phenom II X4 955
- Memory: 4GB
- Video: NVIDIA GeForce GTX660/GTX750ti/GTX950/GTX1050 or AMD Radeon HD6970/HD7870/R9 270/R9 370/RX460, 2 GB VRAM
Be sure to update your video card drivers and other software
Before you remember the worst words and express them towards the developers, do not forget to go to the official website of the manufacturer of your video card and download the latest drivers. Often, drivers specially optimized for them are prepared for the release of games. You can also try installing a later version of drivers if the problem is not solved by installing the current version.
It is important to remember that you should only download the final versions of video cards - try not to use beta versions, as they may have a large number of unfound and unfixed errors.
Don't forget that for stable operation of games, you often need to install the latest version of DirectX, which is always possible.
Black screen of death on Huawei Honor – how to fix it?
Black screen of death on Huawei Honor is a problem that can occur on mobile devices and is characterized by nothing being displayed on the screen at all. When this occurs, your phone may be turned on and still receive audio notifications, or it may be turned off completely. The black screen of death on Huawei Honor usually occurs when you drop the phone or get it wet, but it can also be caused by some form of software glitch.
If the problem is caused by a faulty hardware component, then there is no other option than to take the device to a service center and have it repaired.
However, if the problem is caused by a software glitch, the problem can most likely be fixed by following the troubleshooting steps listed below.
For Honor won't start
Many problems with launching games occur due to incorrect installation. Check if there were any errors during installation, try uninstalling the game and running the installer again, after disabling the antivirus - often files necessary for the game to work are deleted by mistake. It is also important to remember that the path to the folder with the installed game should not contain Cyrillic characters - use only Latin letters and numbers for directory names.
It also doesn’t hurt to check if there is enough space on the HDD for installation. You can try to run the game as Administrator in compatibility mode for different versions of Windows.
For Honor no sound
Before launching For Honor
, make sure the other program has sound. After that, look to see if the sound is turned off in the game settings and whether the correct device for sound playback is selected there. Next, you should open the mixer while the game is running and check if the sound there is turned off.
If you have an external sound card, update the drivers for it, and then install the game.
This concludes our selection of solutions to problems with performance and launch of For Honor, we will definitely update the article with new information.
Stay with us in the coming days, we have prepared a lot of interesting things about this game for you. Battlefield 2042 giveaway on PC! Go to our telegram channel @Night City to find out more and take part.
For Honor is slow. Low FPS. Lags. Friezes. Freezes
First, install the latest drivers for your video card; this can significantly increase the FPS in the game. Also check your computer's load in the task manager (opened by pressing CTRL+SHIFT+ESCAPE). If before starting the game you see that some process is consuming too many resources, turn off its program or simply end this process from the task manager.
Next, go to the graphics settings in the game. First of all, turn off anti-aliasing and try lowering the post-processing settings. Many of them consume a lot of resources and disabling them will significantly improve performance without significantly affecting the picture quality.
For Honor: Marching Fire freezes. The picture freezes. Solution
The situation is approximately the same as with crashes: many freezes are directly related to the game itself, or rather to the developer’s mistake when creating it. However, often a frozen picture can become a starting point for investigating the deplorable state of a video card or processor. So if the picture freezes in For Honor: Marching Fire, then use programs to display statistics on component loading. Perhaps your video card has long exhausted its working life or the processor is heating up to dangerous temperatures? The easiest way to check the load and temperatures for the video card and processors is in the MSI Afterburner program. If you wish, you can even display these and many other parameters on top of the For Honor: Marching Fire picture. What temperatures are dangerous? Processors and video cards have different operating temperatures. For video cards they are usually 60-80 degrees Celsius. For processors it’s a little lower – 40-70 degrees. If the processor temperature is higher, then you should check the condition of the thermal paste. It may have already dried out and requires replacement. If the video card is heating up, then you should use a driver or an official utility from the manufacturer. It is necessary to increase the number of revolutions of the coolers and check whether the operating temperature decreases.
For Honor won't install. Installation stuck
First of all, check if you have enough HDD space for installation. Remember that for the installation program to work correctly, the stated amount of space is required, plus 1-2 gigabytes of free space on the system disk. In general, remember the rule - there should always be at least 2 gigabytes of free space on the system disk for temporary files. Otherwise, both games and programs may not work correctly or may refuse to start at all.
Installation problems can also occur due to a lack of Internet connection or unstable operation. Also, do not forget to pause the antivirus while installing the game - sometimes it interferes with the correct copying of files or deletes them by mistake, considering them viruses.
For Honor: Marching Fire lags. Large delay when playing. Solution
Many people confuse “brakes” with “lags,” but these problems have completely different causes. For Honor: Marching Fire slows down when the frame rate at which the image is displayed on the monitor decreases, and lags when the delay when accessing the server or any other host is too high.
This is why lags can only occur in online games. The reasons are different: bad network code, physical distance from servers, network congestion, incorrectly configured router, low Internet connection speed.
However, the latter happens least often. In online games, communication between client and server occurs through the exchange of relatively short messages, so even 10 MB per second should be enough.
Controls don't work in For Honor
Sometimes game controls do not work due to multiple input devices being connected at the same time. Try disabling the gamepad or, if for some reason you have two keyboards or mice connected, leave only one pair of devices. If your gamepad does not work, then remember that games are officially supported only by controllers defined as Xbox joysticks. If your controller is detected differently, try using programs that emulate Xbox joysticks (for example, x360ce).
For Honor: Marching Fire crashes. At a specific or random moment. Solution
You play for yourself, play and then - bam! - everything goes out, and now in front of you is a desktop without any hint of a game. Why is this happening? To solve the problem, you should try to figure out what the nature of the problem is.
If a crash occurs at a random moment in time without any pattern, then with a 99% probability we can say that this is a bug of the game itself. In this case, it is very difficult to fix something, and the best thing to do is just put For Honor: Marching Fire aside and wait for the patch.
However, if you know exactly at what moments the crash occurs, then you can continue the game, avoiding situations that provoke a crash.
However, if you know exactly at what moments the crash occurs, then you can continue the game, avoiding situations that provoke a crash. In addition, you can download the For Honor: Marching Fire save in our file archive and bypass the departure location.
NAT error
The developers indicate that the problem appears if your group has more than one player with a limited NAT type. For Honor allows you to play matches with only one such player. Changing the NAT type is entirely the responsibility of the users.
Ubisoft pointed out some other issues, notably issues with the 21:9 resolution and a confusing menu in custom match mode. At the moment there is no solution, but the developers are working hard.
If you have any specific problems, let us know in the comments. We will try to help you. We have made a selection of the latest free giveaways for you on Steam, EGS, Origin and PS Store in our telegram ❤️
- For Honor Guide: 10 Tips for Newbies
- Review of For Honor - the warriors cried, but injected themselves
Resetting Hard Reset
In case the above steps fail to fix the Huawei Honor black screen of death issue, the best way to solve it is to perform a factory reset.
Please note that this action will erase your phone data.
- Turn off your phone.
- Press and hold the Volume Up button and the Power button on your device at the same time for a few seconds.
- The phone will go into stock recovery mode
- Use the Volume buttons to highlight the wipe cache/factory reset option and press the Power button to select it
- Reboot the system after the process is completed
If the steps above do not resolve the issue, you will need to take your phone to a service center and have it checked as it is most likely already caused by a faulty hardware component.
Booting your smartphone in safe mode
In some cases, an app downloaded from the Google Play Store may cause problems with your phone when it is installed. To check if the app you downloaded is causing the black screen issue, you need to start your Huawei Honor phone in Safe Mode as only pre-installed apps are allowed to run in this mode.
- Turn off your phone by holding the Power button for a few seconds.
- Press and hold the Power button and release it when you see the Honor logo on the screen.
- After releasing the Power key, immediately press and hold the Volume Down key.
- Continue holding the Volume key until the phone boots up completely.
- Once your phone boots up, you should see "Safe Mode" at the bottom of the screen.
If the problem does not occur in this mode, then it is most likely caused by an application that you have installed. Find out what this application is and remove it.
To find out which application is causing the problem, you need to do some trial and error. Reboot your phone normally and then uninstall the last app you downloaded before the problem occurred. Check if the problem still occurs. Repeat this step until the problem goes away. The last app you uninstalled is most likely causing the problem.
Perform a soft reset
Try updating your phone software by performing a soft reset. This usually resolves problems caused by minor software glitches.
- Press and hold the power button for up to 45 seconds.
- Wait for the device to reboot.
Check if the black screen of death issue on Huawei Honor is still occurring.
