The SIM slots in each phone are different. In some places there are auxiliary elements for removing the SIM card, but in others it is quite difficult to do this. However, owners of complex smartphones have already learned how to operate them using improvised means.
In the iPhone you will not find the usual SIM card slot, as in Androids. The manufacturer even includes a special paperclip with the kit, a key for opening the slot, which is most often located on the side (iphone 5). However, it may happen that the key is not included in the set. The first generations of Apple phones were produced without such an auxiliary tool at all, for example the iPhone S. Let's look at what a paper clip is for removing a SIM card, and how to remove a SIM card from an iPhone 4 (5.6) and how to insert a SIM card into the phone.
How to open the SIM card tray in Xiaomi using an eject clip
Despite not understanding how to remove the Xiaomi SIM card slot for the first time, there is nothing complicated in the procedure. Carefully insert the tail of the paper clip into the hole.
There is no need to move from side to side, nor do you need to pick.
You need to carefully insert the paperclip until it clicks. This tail should be perpendicular to the side surface of the phone.
After a click is heard, the SIM card plate will pop out a short distance away. You need to pull it towards yourself with your fingers until it is fully extended.
Note! The plate is very thin and extends all the way. She pulls herself completely out of the phone. You can’t lose it, since it’s not easy to buy such a part.
SIM cards supported by Xiaomi
The majority of the company's devices support two SIM cards simultaneously. Therefore, it will be possible to integrate both Nano-SIM and Micro-SIM into the device.
The device also has the ability to insert a Nano-SIM memory card, but then you can only use a memory card and a Micro-SIM.
Modders on the Internet have come up with a method to use 2 SIM cards and a memory card. The technique is called “Sandwich”. It’s not often possible to cut a Nano-SIM properly; it doesn’t always fit.
Simultaneous placement of two cards and an SD drive
If the developer has not provided for such a possibility, then you can get out of the situation manually.
Removing the chip from the card
- Remove the chip from the SIM card. To do this, you need to carefully heat the plastic on the sides until it becomes pliable, then use tweezers to pry and remove the gold microcircuit. You can use a lighter or a hair dryer;
- Carefully sand the chip from the bottom side and along the edges, remove about 1-2 millimeters of plastic;
- Using superglue, attach the chip to the SD drive. You need to look for additional information specifically about your SIM card. The proper placement of the chip varies among different telecom providers.
Correct location of the chip on the drive
Gluing two cards is a complex process; there is a chance of breaking the flash drive, internal contacts, or even completely losing the ability to remove the tray from the device. It is safer and easier to purchase a model that has an additional memory tray instead of a mixed slot.
Installing a SIM card in a new device is no more difficult than in the previous one. Xiaomi devices are similar to each other and open using the same method. If the paperclip was lost or was not supplied, you can use a standard paperclip, first straightening one side of it.
How to remove the SIM card tray
To insert a SIM card, you will first need to remove the tray. It is located on the left side of the device, and is obtained by using a paper clip supplied in the box.
- Find the packaging and look inside it;
- After that, remove the iron clip shown in the image below from there. Thanks to her, you will be able to open your smartphone;
Note! Be sure to turn off your device before proceeding to the next step.
- Place the device on something soft to avoid scratching the display. You need to make sure that the device does not fall. Find the hole shown in the photo below. It is necessary to remove the tray;
- Slowly press the paper clip, without applying excessive force, and the tray should come out;
- Pull out the paperclip and put it back - it is no longer needed. Carefully grasp the tray from both sides and remove it from the device.
Installing a memory card
Inserting a memory card
It is not always possible to insert an SD card. Many devices do not use this feature; they already have a large supply of internal memory.
The flash drive is installed either in an additional slot or in a mixed slot. In the latter case, the tray has two unusually shaped recesses, and the user must choose whether to install one SIM card and a memory card into the device, or just two SIM cards. The second one needs to be cut to Nano.
The SD card is installed using a similar method as the SIM card. A mixed slot is marked with a standard icon; it cannot be confused. The contacts need to be directed upwards. To remove the memory module, you should remove the tray using the above method and pick up the flash drive with a paper clip or your fingernail.
And now for an explanation
To remove a SIM card from a Sony Ericsson w580i phone (and other similar ones), you can use regular
STAPLES FOR BINDER (STAPLER)
.
The only condition is that there should be about 10 pieces glued together. You have seen the whole procedure, so take the staples, insert them between the phone body and the SIM card, and remove the SIM card using the movements shown.
I also had this happen once. Then I took a compass and carefully made a line on the SIM card, which I then grabbed with my fingernail and pulled out the SIM card. Now this line on the SIM card helps me easily get the SIM card out of the phone. The main thing is not to damage the important part of the SIM card, doing everything carefully. Also, in some phones it is possible to remove the SIM card using tweezers.
A needle or thin scissors can damage your phone or SIM card. Try to disassemble the device. If you can’t do it yourself, take it to a service center, they will help you remove it carefully and will definitely not damage your phone or SIM card.
How to insert a SIM card into iPad
The iPad in this case is no different from the iPhone and the SIM card is inserted in the same way. A key, needle or paper clip is also used here. You can use another sharp object. Only the hole is not located on the wall of the tray, but nearby, so problems will arise with the diameter of the sharp object used. To prevent this from happening, just use a special key. If not, a very thin needle will do.
Some iPad models are equipped with a simple tray that is quite easy to open by yourself and just with your hands. To do this, press on the wall and wait for the characteristic click. If this happens, the tray comes out a little. Next, you need to carefully pull the receiver wall towards you with your hands and pull out the frame to accommodate the SIM card. They take out the card themselves with their fingers, after which they carry out the necessary manipulations.
Changing a SIM card on an iPad
